Call Now: 1-800-284-2288 |
IP FLEXIDOME, 1/3-INCH COLOR, NIGHTSENSE, 2.8-10MM |
|
|
The Bosch NDC-455V03-21PS FlexiDome Color IP Camera, with a 1/3” color CCD sensor and a 2.8-10mm varifocal lens (f/1.2), delivers high-quality imagery at up to 4CIF resolution and up to 540TVL. Progressive scan ensures minimized motion blur, thereby enhancing the picture quality. The tri-stream video feature allows the FlexiDome camera to simultaneously output 2 streams of H.264 video along with 1 M-JPEG stream onto a network.
Available Configurations Include:
NDC-455V03-22IPS | IP FLEXIDOME, 1/3-INCH COLOR, NIGHTSENSE, 2.8-10MM, H.264, NTSC, POE, IVA factory installed, SMB, SD CARD SLOT |
NDC-455V03-21PS features include:
Signal System | NTSC |
Sensor | 1/3" CCD |
Pixels | 768 x 494 |
Compression | H.264 (ISO/IEC 14496-10); M-JPEG, JPEG |
Data Rate | 9.6 Kbps to 6 Mbps |
Resolution | 4CIF: 704 x 480 (30 ips) CIF: 352 x 240 (30 ips) |
Delay | Overall IP Delay: Min. 120 ms, Max. 240 ms |
GOP Structure | I, IP |
Frame Rate | 1 to 60 H.264 1 to 30 M-JPEG |
Video Output | Analog composite for service (2.5mm jack) |
Horizontal Resolution | 540 TVL |
Signal to Noise Ratio | 50 dB |
Sensitivity | Sensitivity (3200 K, scene reflectivity 89%, F1.2) Color 30 IRE: 0.30 Lux 50 IRE: 0.65 Lux 100 IRE: 2.6 Lux NightSense 30 IRE: 0.012 Lux 50 IRE: 0.26 Lux 100 IRE: 1.04 Lux |
Controls | Color/NightSense: Auto, Forced Dynamic Range: 60 dB (10-bit image processing) Signal-to-noise Ratio: > 50 dB BLC: Center window weighting Gain: 20 dB (max) White Balance: ATW (2500 to 10000 K), ATWHold Shutter: Auto 1/60 to 1/50000) automatic flickerless, fixed selectable Auto Black: Automatic continuous, Off Privacy Masking: Four independent areas, fully programmable Video Motion Analysis: Motion+ or IVA Test Pattern Generator: Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane Synchronization: Internal, Line Lock, selectable Controls: OSD with soft-key operation (multi-lingual) |
Audio | Standard: G.711 300 Hz to 3.4 kHz at 8 kHz sampling rate Signal-to-noise ratio: > 50 dB |
Audio I/O | Audio: 1 x mono line in, 1 x mono line out Signal line in: 9 kOhm typical, 5.5 Vpp max Signal line out: 3.0 Vpp at 10 kOhm typical 2.3 Vpp at 32 Ohm typical 1.7 Vpp at 16 Ohm typical |
Alarm Inputs | Alarm: 1 input Activation voltage: +5 VDC to +40 VDC (+3.3 VDC with DC-coupled 22 kOhm pull-up resistor) |
Relay Outputs | Relay: 1 output Connector: Clamp Voltage: 30 VAC or +40 VDC Maximum 0.5 A continuous, 10VA |
Software Control | Unit Configuration: Via web browser or Configuration Manager Flicker Control: 50/60 Hz, selectable Software update: Flash ROM, remote programmable |
Network Protocol | RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, 802.1x, UPnP |
Encryption | TLS 1.0, SSL, AES (optional) |
Ethernet | STP, 10/100 Base-T, auto-sensing, half/full duplex, RJ45 |
PoE | IEEE 802.3af compliant |
Lens | Focal Length: 2.8-10mm Type: IR corrected Zoom: manual Focus: manual Iris: Automatic iris control Viewing angle: Wide 100.8 x 73.7° (H x V) Tele 28.5 x 21.4° (H x V) |
Power Requirements | 24 VAC ±10% 60 Hz 12 VDC ±10% Power-over-Ethernet |
Power Consumption | 500 mA / 650 mA IVA (12 VDC) 500 mA / 650 mA IVA (24 VAC) 200 mA (PoE 48 VDC) |
Operating Temperature | Heater Off: -4 ~ 122°F (-20 ~ 50°C) - colds start Heater On: -58 ~ 122°F (-50 ~ 50°C) |
IP Rating | IP 66 and NEMA‑4X |
Construction | Mounting: Flush mount or surface mount Color: White (RAL9010) trim ring with black inner liner Adjustment range: 360º pan, 90º tilt, ±90º azimuth Dome bubble: Polycarbonate, clear with UV blocking antiscratch coating Trim ring: Aluminum |
Dimensions (Diam. x H) | Surface Mount: 6.2 x 4.9" (158 x 124mm) Flush Mount: 6.2 x 3.3" (158 x 84mm) - exposed portion |
Weight | Surface Mount: 2.8 lb (1.3 kg) Flush Mount: 1.5 lb (0.7 kg) |
flexidome-455.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|