|
Progressive Scan Board Camera
|
|
|
By: Sentech
Industrial, USB, & Medical Cameras
|
The Sentech STC-83 is a full featured, low cost, XGA progressive scan machine vision board camera with a 1/3" monochrome CCD.
The STC 83 features a full frame 30fps XGA output, partial scanning, triggering and reset capabilities.
STC-83 features include:
- 1/3" XGA Progressive Scan CCD
|
|
|
|
|
| Resolution |
XGA (0.8 MegaPixel) |
| Image Sensor |
1/3" Interline CCD (ICX204AL) |
| Signal Format |
Monochrome Progressive Analog |
| Frame Rate |
30 fps |
| Effective Picture Element |
1034 (H) x 779 (V) |
| Active Picture Element |
1024 (H) x 768 (V) |
| Chip Size (mm) |
5.80 (H) x 4.92 (V) |
| Cell Size (um) |
4.65 (H) x 4.65 (V) |
| Vertical Frequency |
29.18 Hz |
| Horizontal Frequency |
23.228 kHz |
| Pixel Clock Frequency |
14.75 MHz |
| Scanning Method |
Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4), Binning, Binning Partial Scan (1/1, 1/2, 1/4) |
| Sync System |
Internal and External (HD/VD) Automatically |
| Communication |
RS232C |
| Trigger Mode |
Pulse Width Trigger, Edge Preset Trigger (10 Steps) |
| Electronic Shutter |
1/30 ~ 16,000 (10 steps) |
| Minimum Illumination |
0.08 Lux @ F1.2, 20 IRE; 0.17 Lux @ F1.2, 50 IRE (Gain ON) |
| Gain |
AGC/Manual (4 to 24 dB) |
| S/N Ratio |
50dB (Gain 0dB) |
| Gamma |
1.0 |
| Lens Mount |
CS Mount |
| Video Output |
1Vp-p 75Ω |
| Shock |
70G (3 directions, 3 times each) |
| Vibration |
10G (20 to 200Hz) |
| InputVoltage |
12Vdc /- 10% |
| Power Consumption |
1.56W, 130mA |
| Operating Temperature |
-10°C ~ 45°C ( 14°F ~ 113°F) |
| Storage Temperature |
-30°C ~ 60°C ( -22°F ~ 140°F) |
| Dimensions |
30 (W) x 30 (H) x 32 (D) mm (1.12 x 1.12 x 1.28) |
| Weight |
27g (0.95 oz.) |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.
