Hitachi : KP-FD202SCL
Description
The Hitachi KPFD202SCL By adopting a CameraLink digital interface, higher speed video data transfer is possible. Furthermore, by adopting the small connector (SDR) of a Mini CameraLink standard, the size of the camera has been reduced. High resolution combined with high frame rates are possible with this series of cameras.Can be used for high-precision and high-speed image processing in many applications.
The Hitachi KP FD202SCL offers Higher resolution in the vertical directional is ensured for moving object. A multi-step electronic shutter along with a variable speed electronic shutter is standard with a minimum shutter speed of 1/100,000 second. A one trigger and fixed shutter mode of frame-on-demand are provided allowing precise timing and exposure for image capture. Through the CameraLink interface, various setting such as shutter, mode, gain, partial scan, bit depth, etc can be adjusted.
Features
→ OFF is normal exposure (frame rate) or changeable by variable shutter (from 10 to 1/100000 second)→ CameraLink (CC1) or DCIN/SYNC connector
Specifications
| Imaging device | 1/1.8-inch progressive scan interline CCD |
| Total pixels | 1688 (H)x1248 (V) |
| Effective pixels | 1628 (H)x1236 (V) |
| Pixel size | 4.4 µm (H)x4.4 µm (V)(square lattice) |
| Color filter | RGB primary color mosaic filter |
| Sensing area | 7.13 mm (H)x5.37 mm (V) |
| Scanning system | Progressive |
| Aspect ratio | 4 : 3 |
| Frame rate | 30 frames per second (full pixel readout) |
| Horizontal drive frequency | 72.0000 MHz |
| Scanning frequency | Horizontal: 37.5 kHz , Vertical: 29.95 Hz |
| Sync system | Internal |
| Lens mount | C mount (Flange focal distance = 17.526 mm |
| Video output | Interface: CameraLink 72.0000 MHz |
| Protocol | Base configuration (1ch: SDR connector x 1pc.) Medium configuration (2ch: SDR connector x 2pcs) |
| Output format | (a) 24bits (R: 8bit G: 8bit B: 8bit) (Base configuration); (b) 30bits (R: 10bit G: 10bit B: 10bit) (Medium configuration); (c) 36bits (R: 12bit G: 12bit B:1 2bit) (Medium configuration) |
| Output image size | 1620 (H) x 1220 (V) (full pixel readout) |
| Sensitivity | 2000 lx, F5.6, 3200 K |
| Minimum illumination | 10 lx (F1.4, MAX GAIN) |
| Signal noise to ratio | 48 dB |
| Electric shutter | OFF, 1/30, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. |
| Frame on demand | Mode: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode; (C) VD reset mode |
| Trigger input - Partial scan | Selectable start position and height of picture grabbing in 1H step. |
| ALC (Auto level control) | Mode: (A) AGC (Auto gain control); (B) AES (Auto electric shutter); (C) AGC & AES |
| Video Level | Adjustable |
| Gain | Auto/Manual (0 to 18dB) (Approx. 0.0358dB step) |
| White balance | ATW / MANUAL / One-push |
| Gamma | OFF (γ=1) / LUT |
| Color masking | OFF / ON (6 vector independent masking) |
| Paint black | Adjustable |
| Sharpness | Adjustable |
| Brightness | Adjustable |
| Knee | Adjustable |
| Power supply voltage | 12 ± 1 VDC |
| Current consumption | Approx. 340 mA (Approx. 4.1W) |
| Ambient temperature | Performance: 0 to 40 °C ( 32 to 104 °F), less than 90 % RH (without dew condensation) |
| Operation | -10 to 50 °C ( 14 to 122 °F), less than 90 % RH (without dew condensation) |
| Storage | -20 to 60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation) |
| Vibration endurance | 10 to 55Hz (2.37 to 71.7 m/s2), sweep: 1minute, XYZ, 30 min |
| Shock endurance | 490.3 m/s2 (Drop test, once each top, bottom, left and right) |
| External dimensions | 44 (W)x44 (H)x41 (D) mm (Not including protrusions) |
| Mass | Approx. 110 g |