Supplying Wholesale Markets • OEM Solutions • Extensive Product Range

Hitachi KP-FD202PCL Power Over Camera Link Color Camera

Hitachi Industrial Video System and Broadcast Logo

Industrial Video System & Broadcast

Hitachi : KP-FD202PCL

Description

The Hitachi KPFD202PCL is connected by a single (PoCL) Mini CameraLink cable directly to a frame grabber supporting PoCL. Simple systems construction is possible. High resolution combined with high frame rates are possible with this series of cameras.Can be used for high-precision and high-speed image processing in many applications. A one trigger and fixed shutter mode of frame-on-demand are provided allowing precise timing and exposure for image capture. Through the CameraLink interface, various setting such as shutter, mode, gain, partial scan, bit depth, etc can be adjusted. The start position and height of the image can be adjusted. Higher frame rates are possible by using partial scan mode.

The Hitachi KP FD202PCL is adopting a CameraLink digital interface, higher speed video data transfer is possible. Furthermore, by adopting the small connector (SDR) of a Mini CameraLink standard, the size of the camera has been reduced. The PoCL version is connected by a single (PoCL) Mini CameraLink cable directly to a frame grabber supporting PoCL. Simple systems construction is possible. High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications. A 6-Vector color corrector can be selected, allowing independent adjustment of the hue and saturation of the primary R,G,B, and complementary Cy, Mg, and Ye vectors, for accurate color reproduction of difficult objects.

Features

OFF is normal exposure (frame rate) or changeable by variable shutter (from 10 to 1/100000 second)
CameraLink (CC1) or DCIN/SYNC connector

Specifications

 

Imaging device 1/1.8-inch progressive scan interline CCD
Total pixels 1688 (H)x1248 (V)
Effective pixels 1628 (H)x1236 (V)
Pixel size 4.4 µm (H)x4.4 µm (V)(square lattice)
Color filter RGB primary color mosaic filter
Sensing area 7.13 mm (H)x5.37 mm (V)
Scanning system Progressive
Aspect ratio 4 : 3
Frame rate 30 frames per second (full pixel readout)
Horizontal drive frequency 72.0000 MHz
Scanning frequency Horizontal: 37.5 kHz , Vertical: 29.95 Hz
Sync system Internal
Lens mount C mount (Flange focal distance = 17.526 mm
Video output Interface: CameraLink 72.0000 MHz
Protocol Base configuration (1ch: SDR connector x 1pc.) Medium configuration (2ch: SDR connector x 2pcs)
Output format (a) 24bits (R: 8bit G: 8bit B: 8bit) (Base configuration); (b) 30bits (R: 10bit G: 10bit B: 10bit) (Medium configuration); (c) 36bits (R: 12bit G: 12bit B:1 2bit) (Medium configuration)
Output image size 1620 (H) x 1220 (V) (full pixel readout)
Sensitivity 2000 lx, F5.6, 3200 K
Minimum illumination 10 lx (F1.4, MAX GAIN)
Signal noise to ratio 48 dB
Electric shutter OFF, 1/30, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second.
Frame on demand Mode: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode; (C) VD reset mode
Trigger input – Partial scan Selectable start position and height of picture grabbing in 1H step.
ALC (Auto level control) Mode: (A) AGC (Auto gain control); (B) AES (Auto electric shutter); (C) AGC & AES
Video Level Adjustable
Gain Auto/Manual (0 to 18dB) (Approx. 0.0358dB step)
White balance ATW / MANUAL / One-push
Gamma OFF (γ=1) / LUT
Color masking OFF / ON (6 vector independent masking)
Paint black Adjustable
Sharpness Adjustable
Brightness Adjustable
Knee Adjustable
Power supply voltage 12 ± 1 VDC
Current consumption Approx. 340 mA (Approx. 4.1W)
Ambient temperature Performance: 0 to 40 °C ( 32 to 104 °F), less than 90 % RH (without dew condensation)
Operation -10 to 50 °C ( 14 to 122 °F), less than 90 % RH (without dew condensation)
Storage -20 to 60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation)
Vibration endurance 10 to 55Hz (2.37 to 71.7 m/s2), sweep: 1minute, XYZ, 30 min
Shock endurance 490.3 m/s2 (Drop test, once each top, bottom, left and right)
External dimensions 44 (W)x44 (H)x41 (D) mm (Not including protrusions)
Mass Approx. 110 g