Hitachi : KP-FD500GV
Description
The Hitachi KPFD500GV is single CCD type RGB color camera which utilized the progressive scan CCD image sensor with square pixel for SXGA format of 2/3-inch which adopted the RGB primal color mosaic filter. By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, by using hub or switcher, construction of multiple camera system can be easily performed.
The Hitachi KP FD500GV 2/3-inch 5,010,000 pixels square lattice progressive scan CCD and the RGB primary color mosaic filter achieve a high resolution and high color fidelity of 2448(H) x 2050(V). High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to PC by the diameter cable of thin as compared with parallel output. It is possible to 100m. Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed data transmit is available and suitable for image processing. Power supply can be input via Ethernet cable (Power over Ethernet).
Specifications
| Imaging device | 2/3-inch progressive scan interline CCD |
| Total number of pixels | 2536(H)x2068(V) |
| No. of effective pixels | 2456(H)x2058(V) |
| Pixel size | 3.45 µm(H)x3.45 µm(V) (Square pixel) |
| Scanning area | 8.47 mm(H)x7.10 mm(V) |
| Scanning system | Progressive |
| Sync system | Internal / external |
| Lens mount | C mount |
| Flange focal distance | 17.526 mm |
| Video output | Interface: Gigabit Ethernet |
| Protocol | GigE Vision compliant |
| Transfer rate | 1 Gbit per second |
| Image format | Mono 8/10/12bit |
| Image size | 2448(H)x2050(V) |
| Frame rate | 16 frames per second |
| Mono 10/12bit | 11 frame per second |
| Sensitivity | 400 lx, F8, 3200K |
| Electric shutter speed | OFF/Auto(AES)/Manual(PRESET or VARIABLE),OFF is normal exposure(frame rate) |
| PRESET | 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second |
| VARIABLE | From 10 second to approx. 1/100000 second |
| External trigger shutter | Mode: Fixed shutter,One trigger,VD Sync,Reset control |
| Input | Via Gigabit Ethernet cable (Software trigger),12-pin connector (Hardware trigger) |
| Input level | 5 to 24 Vp-p |
| External sync signal | VD output: 5 Vp-p ±0.3 V |
| Strobe out | 5 Vp-p ±0.3 V |
| Partial scan | Grabbing image area is adjustable at horizontal / vertical |
| ALC (Auto level control) | Adjustable for video level |
| White balance | ATW/MANUAL/One-push |
| Gain | Auto / Manual (0 dB to 12 dB) |
| Gamma | OFF (γ=1) / ON |
| Color masking | OFF/ON (6 color independent masking) |
| Paint black | Adjustable |
| Sharpness | Adjustable |
| Black level | Adjustable |
| Knee | Adjustable |
| Power supply | DC 12 V plus minus 1 V (input from 12-pin connector),48 V (PoE) |
| Power consumption | Approx. 7.8 W (DC 12 V) |
| Ambient temperature | Performance: 0 °C to 40 °C / 90 %RH or less |
| Operating | –10 °C to 50 °C / 90 %RH or less |
| Storage | –20 °C to 60 °C / 70 %RH or less |
| Vibration endurance | 98.6 m/s2 or less(15 to 200 to 15 Hz, 10 minutes each on XYZ axes) (Do not subject to strong vibration for long periods of time.) |
| Shock endurance | 490.3 m/s2 or less (vertical, horizontal, once each face) |
| External dimensions | 44(W)x29(H)x72(D) mm (not including lens and protrusions) |
| Mass | Approx. 140 g (without lens) |
| Supplied equipment | Camera and CD-ROM (Operation manual / driver software) |
| Optional accessories | Tripod adaptor (TA-M1),LAN cable (Enhanced category 5 or Category 6) |