Hitachi : KP-FR30PCL
0.33 Megapixel Raw Data Output Power Over Camera Link Industrial Camera
Industrial Video System & Broadcast
Description
The Hitachi KPFR30PCL are CameraLink output system progressive scan RAW data output color CCD camera with a 1/3-inch size CCD which adopted the RGB primary color filter and a full fame shutter. The image of 659 (H) x 494 (V) is output in RAW data at 60 frames per second. The square format picture elements provide suitability for image processing applications.
The Hitachi KP FR30PCL trigger and shutter can be used to capture an image at the desired timing and the accumulation time. 1/3-inch 330,000 pixels square lattice progressive scan CCD and the RGB primary color mosaic filter achieve a high color fidelity of 659 (H) x 494 (V) (VGA). The camera has small SDR connector for digital outputs. Therefore, the camera has the realization of small-sized shape of 29 (W) x 29 (H) x 29 (D) mm. Power supply is input via CameraLink cable.
Specifications
| Imaging device | 1/3-inch interline CCD |
| Total pixels | 692 (H)x504 (V) |
| Effective pixels | 659 (H)x494 (V) |
| Pixel size | 7.4 µm (H)x7.4 µm (V)(square lattice) |
| Color filter | RGB primary color mosaic filter |
| Sensing area | 4.88 mm (H)x3.66 mm (V) |
| Scanning system | Progressive |
| Aspect ratio | 4 : 3 |
| Frame rate | 60 frames per second (full pixel readout) |
| Horizontal drive frequency | 25.5454 MHz |
| Scanning frequency | Horizontal: 31.468 kHz, Vertical: 59.94 Hz |
| Sync system | Internal |
| Lens mount | C mount (Flange focal distance =17.526 mm) |
| Video output | Digital output (CameraLink) |
| Base configuration | 24.5454 MHz (Note: maximum cable length is 10 m) |
| Output image size | 659 (H)x494 (V) (full pixel readout) |
| Resolution | Horizontal: 500 TV lines / Vertical: 490 TV lines |
| Sensitivity | 2000 lx, F5.6, 3200 K |
| Minimum illumination | 10 lx (F1.4, MAX GAIN) |
| Signal noise to ratio | 50 dB |
| Electric shutter | OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second; OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second) |
| Gamma | γ = 1 |
| Frame on demand | Mode: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode; (C) Reset control mode; (D) VD reset mode |
| Trigger input | CameraLink (CC1) *When Reset control mode CC1 and CC2 are used |
| Partial scan | Selectable start position and height of picture grabbing in 1H step. |
| Power supply voltage | 12 ± 1 VDC |
| Current consumption | Approx. 120 mA (approx. 1.5 W) |
| Ambient temperature | Performance: 0 to 40 °C ( 32 to 104 °F), less than 90 % RH (without dew condensation) |
| Operation | 10 to 50 °C ( 14 to 122 °F), less than 90 % RH (without dew condensation) |
| Storage | -20 to 60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation) |
| Vibration endurance | 98 m/s2 (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes |
| Shock endurance | 686 m/s2 (Drop test, once each top, bottom, left and right) |
| External dimensions | 29 (W)x29 (W)x29 (D) mm (Not including protrusions) |
| Mass | Approx. 50 g |