Hitachi KP-FBR30SCL 0.33 Megapixel Raw Data Output Mini Camera Link Industrial Camera
By: Hitachi
Industrial Video System & Broadcast
Hitachi : KP-FBR30SCL
Description
The Hitachi KPFBR30SCL is a Ultra Compact Remote Head Camera with a Head Size 12(W) x 12.5(H) x 47.5(L)mm. It offers a 1/3 Format Progressive Scan CCD and 659 x 494 Effective Pixels with Raw Color Output (unprocessed).
The Hitachi KP FBR30SCL features 500 TV lines of Resolution, 60 Frames / Second, CameraLink Output, 10 bits per pixel, Frame-on-Demand Mode and is RoHS Compliant.
Specifications
| Imaging device | 1/3-inch interline CCD |
| Total pixels | 692(H) x 504(V) |
| Effective pixels | 659(H) x 494(V) |
| Pixel size | 7.4(H) x 7.4(V)μm(square lattice) |
| Drive frequency | 24.5454MHz |
| Scanning system | Progressive |
| Scanning frequency | Horizontal: 31.468kHz; Vertical: 59.94Hz; Vertical two pixel addition mode; Horizontal: 31.468kHz; Vertical: 119.65Hz |
| Sync system | Internal |
| Frame rate | 16.7ms/frames; 8.35ms/frames (Vertical two pixel addition mode) |
| Sensitivity | 400lx, F4, 3200 K (without IR cut filter) |
| Min. illumination | 7.4Lx, F1.4, MAX GAIN (without IR cut filter) |
| Signal to noise ratio | 50dB or more |
| Video output | Digital output: Camera Link standard; Data: Base configuration 10bit x 2channel; Clk = 24.5454MHz 10bit x 2channel |
| Power supply | 12 VDC ± 10% |
| Current consumption | 2.4 W |
| Electronic shutter speed | 1/60 to 1/100000 second (variable setting) |
| Frame on demand | One trigger, Fixed shutter (variable setting) |
| Partial scan | Selectable start position and width of picture grabbing in 1H step. |
| Offset | 16 to 128 setps level/10bit; 29 steps variable; Factory setting: 16 step level |
| Gamma compensation | Ɣ= 1 |
| Gain setting | 0 to 12dB (301steps variable) |
| Lens mount | C mount |
| Resolution | Horizontal: 500TV lines; Vertical: 490TV lines |
| Ambient, operating | 0 to 40°C ( 32 to ; 104 F), less than 90 % RH |
| Ambient, storage | -10 to 50°C( 14 to 122 F), less than 70 % RH (Without Dew condensation) |
| Note | If operated continuously, be sure to use at less than 40°C(104 F) for long term stable performance. |
| Vibration endurance | 98 m/s2 (Acceleration: constant);(10 to 200Hz,sweep:10 min,XYZ,30 min) |
| Shock endurance | 686 m/s2 (Drop test, once each top, bottom, left and right) |
| External dimensions HEAD | 12.5 (W) x 12 (H) x 47.5 (D) mm; CCU: 29 (W) x 29 (H) x 38 (D) mm (not including protrusions) |
| Cable length | 3m |
| Mass | Approx. 60g |