Hitachi : KP-FR39SCL
0.33 Megapixel Raw Data Output Mini Camera Link Industrial Camera
Industrial Video System & Broadcast
Description
The Hitachi KPFR39SCL is CameraLink output system progressive scan RAW data output color CCD camera with a 1/3-inch size CCD which adopted the RGB primary color filter and a full fame shutter. The image of 659 (H) x 494 (V) is output in RAW data at 91 frames per second. The square format picture elements provide suitability for image processing applications.
The Hitachi KP FR39SCL 1/3-inch 330,000 pixels square lattice progressive scan CCD and the RGB primary color
mosaic filter achieve a high color fidelity of 659 (H) x 494 (V) (VGA) and high speed at 91 frames per second. The camera has small SDR connector for digital outputs. Therefore, the camera has the realization of small-sized shape of 29 (W) x 29 (H) x 29 (D) mm. Power supply is input from DCIN connector.
Specifications
Imaging device | 1/3-inch interline CCD |
Total pixels | 692 (H)x504 (V) |
Effective pixels | 659 (H)x494 (V) |
Pixel size | 7.4 µm (H)x7.4 µm (V)(square lattice) |
Color filter | RGB primary color mosaic filter |
Sensing area | 4.88 mm (H)x3.66 mm (V) |
Scanning system | Progressive |
Aspect ratio | 4 : 3 |
Frame rate | 91 frames per second (full pixel readout) |
Horizontal drive frequency | 36.0000 MHz |
Scanning frequency | Horizontal: 46.875 kHz, Vertical: 91.73 Hz |
Sync system | Internal |
Lens mount | C mount (Flange focal distance =17.526 mm) |
Video output | Digital output (CameraLink) |
Base configuration | 36.0000 MHz (Note: maximum cable length is 10 m) |
Output image size | 659 (H)x494 (V) (full pixel readout) |
Resolution | Horizontal: 500 TV lines / Vertical: 490 TV lines |
Sensitivity | 2000 lx, F4, 3200 K |
Minimum illumination | 20 lx (F1.4, MAX GAIN) |
Signal noise to ratio | 50 dB |
Electric shutter | OFF, 1/91, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second; OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second) |
Gamma | γ = 1 |
Frame on demand | Mode: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode; (C) Reset control mode; (D) VD reset mode |
Trigger input | CameraLink (CC1) *When Reset control mode CC1 and CC2 are used |
Partial scan | Selectable start position and height of picture grabbing in 1H step. |
Power supply voltage | 12 ± 1 VDC |
Current consumption | Approx. 150 mA (approx. 1.8 W) |
Ambient temperature | Performance: 0 to 40 °C ( 32 to 104 °F), less than 90 % RH (without dew condensation) |
Operation | 10 to 50 °C ( 14 to 122 °F), less than 90 % RH (without dew condensation) |
Storage | -20 to 60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation) |
Vibration endurance | 98 m/s2 (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes |
Shock endurance | 686 m/s2 (Drop test, once each top, bottom, left and right) |
External dimensions | 29 (W)x29 (W)x29 (D) mm (Not including protrusions) |
Mass | Approx. 50 g |