High Dynamic Range 2-Monochrome CCDs Camera
Products that are no longer being manufactured. Please contact us for a replacement option.
Discontinued : AD-081CL
Description
This product has been discontinued (As of April 2019). For an alternative solution, please contact sales.
The AD-081CL is a 2CCD high dynamic range camera with programmable exposure from 20μs to 33ms and 11-step preset shutter from 1/60s to 1/50000s.
The AD-081CL can provide more than double the dynamic range of standard CCD cameras (up to ~120 dB) but in a linear fashion that avoids the noise, shutter, and compression issues found in typical CMOS-based logarithmic or LinLog™ high dynamic range cameras.
Features
→ AD-081CL 2-monochrome prism-mounted progressive scan CCDs (1/3")
→ Member of the C3 Advanced series
→ 1024 (h) x 768 (v) active pixels per channel
→ 4.65 micro m square pixels
→ 30 frames/second with full resolution
→ 60 frames/second for interleaved high frame rate operation
→ Increased frame rates with partial scan or vertical binning
→ Programmable exposure from 20 micro s to 33 m s
→ 11-step preset shutter from 1/60s to 1/50000s
→ Pre-select and pulse width trigger modes
→ PIV (Particle Image Velocimetry) mode available
→ LVAL synchronous/asynchronous operation (auto-detect)
→ Analog video output for auto-iris lens control
→ 10- or 8-bit Camera Link output
→ Two I/O connectors configurable for separate or combined output
→ Setup by Windows NT/2000/XP via serial communication
Specifications
| Sensor 1 | 1/3" Monochrome IT CCD (ICX204AL) |
| Sensor 2 | 1/3" Monochrome IT CCD (ICX204AL) |
| Pixel Clock | 33.75 MHz |
| Frame rate (HDR mode) | 30 frames/sec. |
| Frame rate (interleaved) | 60 frames/sec. |
| Active area | 4.76 (h) x 3.57 (v) mm |
| Cell size | 4.65 (h) x 4.65 (v) micro m |
| Active pixels | 1024 (h) x 768 (v) |
| Read-out modes, Full | 1024 (h) x 768 (v) 30/60 fps |
| Read-out modes, 1/2 partial scan | 1024 (h) x 384 (v) 48/96 fps |
| Read-out modes, 1/4 partial scan | 1024 (h) x 192 (v) 68/136 fps |
| Read-out modes, 1/8 partial scan | 1024 (h) x 96 (v) 86/172 fps |
| Read-out modes, V binning | 1024 (h) x 384 (v) 49.5/99 fps |
| Sensitivity | 1.1 Lux (On sensor, max. gain, shutter off, 50% video) |
| S/N ratio | >54dB (Gain 0 dB, shutter off) |
| Video output | Dual monochrome 8 or 10 bit, synchronized or separate timing. Output selectable to one or both CL connectors |
| Auto-iris lens video | 0.7 Vp-p |
| Gain | -3dB to 12dB |
| Synchronization | Int. X-tal |
| Inputs, Camera Link | Ext. trigger, LVDS, (CC 1) |
| Inputs, TTL (Hirose 12P) | Ext. Trigger 4V ±2V |
| Outputs, Camera Link | EEN, FVAL, LVAL, DVAL, PCLK |
| Outputs, TTL (Hirose 12P) | XEEN (x 2) |
| Trigger modes | Pre Select, Pulse Width and PIV mode |
| Electronic shutter, Pre-set shutter | 1/60 to 1/50,000 sec. in 11 steps |
| Electronic shutter, Programmable exposure | 0.5L to 792L (1LVAL unit) |
| Electronic shutter, Pulse Width Control | 1.5L to 60 frames |
| Auto luminance balance | Gain setting range: -3 to 6 dB (HDR mode), Detection area is selectable from 9 divisions |
| Knee compensation | Knee point, Knee slope (10 or 8 bit) |
| Control interface | Camera Link x 2 |
| Indicators on rear panel | LED for power and trigger input |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 80% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 80% |
| Vibration | 3 G (15Hz to 200 Hz XYZ) |
| Shock | 50G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS |
| Power | 12V DC ± 10%. 3.8 W |
| Lens mount | C-mount (use 3CCD type, rear protrusion <4mm) |
| Dimensions | (H x W x L) 55(H) x 55(W) x 80(D) mm |
| Weight | 400 g |
Resources & Documents
| datasheet_ad-081cl.pdf | Datasheet |