(discontinued) Digital 3CCD Progressive Scan RGB Color Camera
Products that are no longer being manufactured. Please contact us for a replacement option.
Discontinued : CV-M9CL
Description
This item is DISCONTINUED.
The JAI CV-M9CL is an advanced 3CCD camera featuring high resolution (3 x 800,000 pixels), progressive scan, Camera Link interface and a fast readout rate of 30 fps with full resolution.
The CV M9CL camera’s built-in chromatic shading reduction makes the selection of suitable lenses easier.
The CVM9CL outputs pure pixel information with programmable individual exposure for R, G and B. The prism assembly features co-site sampling, where all 3 CCDs are aligned to each other without spatial offset. The result is a high performance camera suitable for a wide range of industrial applications, as well as for medical/scientific use.
Features
→ 3 x 1/3" progressive scan RGB color CCD camera
→ 1024 (h) x 768 (v) 4.65 μm active square pixels for each CCD
→ Compact RGB prism for C-mount lenses
→ Chromatic shading reduction makes lens choice wider
→ 30 frames per second with full resolution
→ 86 fps with 1/8 partial scan
→ Vertical binning for higher sensitivity and frame rate
→ 12-bit internal digital signal processing
→ 24-bit RGB output via Camera Link base configuration. 30-bit via CL medium configuration
→ Edge pre-select and pulse width trigger modes
→ Reset continuous trigger mode and smear-less mode
→ Programmable individual exposure for R, G and B
→ Manual, continuous or one push white balance
→ Color bar test image for set-up
→ Setup by switches or Windows NT/2000/XP software via RS 232C or Camera Link
Specifications
| Sensor | 3 x 1/3" progressive scan CCD |
| Pixel Clock | 33.75 MHz |
| Frame rate full frame | 30 frames/sec. (792 lines per frame) |
| Active area | 4.8 (h) x 3.6 (v) mm |
| Cell size | 4.65 (h) x 4.65 (v) μm |
| Active pixels | 1024 (h) x 768 (v) |
| Readout modes, Full | 1024 (h) x 768 (v) 30 fps |
| Readout modes, 1/2 partial | 1024 (h) x 384 (v) 48 fps |
| Readout modes, 1/4 partial | 1024 (h) x 192 (v) 68 fps |
| Readout modes, 1/8 partial | 1024 (h) x 96 (v) 86 fps |
| Readout modes, Vertical binning | 1024 (h) x 384 (v) 50 fps |
| Sensitivity | 2 Lux (On sensor, Max gain, 50% video) |
| S/N ratio | >50 dB (Green ch., 0 dB gain) |
| Video output | 3 x 8 bit RGB: Base config. CL, 3 x 10 bit RGB: Medium config. CL |
| Auto-iris lens video | 0.7 Vp-p, 75 Ω |
| Gain, manual | Master -3 to 12 dB, R and B -6 to 6 dB |
| Synchronization | Int. X-tal or ext. trigger |
| Inputs, Camera Link | Ext. trigger, LVDS (CC 1) |
| Inputs, TTL | Ext. trigger, 4V ± 2V (TTL) |
| Outputs, Camera Link | Clk, LVAL, FVAL, Data, EEN |
| Outputs, TTL | XEEN |
| Trigger modes Continuous, Edge Pre-Select, Pulse Width | Control, Reset Continuous, Smear-less |
| Electronic shutter, Pre-set shutter | 1/30 to 1/50,000 sec. in 12 steps |
| Electronic shutter, Programmable exposure | 0.5L to 791L in 42μs steps. Common and R, G, B individual |
| Electronic shutter, Pulse Width Control | 2L (84μs) to 23,706L (1 sec.) |
| White balance | Manual, R and B, -6dB to 6dB One-push automatic, 2800 to 6500K Continuous automatic, 2800 to 6500K Fixed 3200, 4600 and 5600K |
| Knee function | Knee point and slope for R, G and B |
| Control interface | Camera Link or RS 232C |
| Functions controlled by serial communication | Shutter, trigger mode, readout mode, trigger input and polarity, white balance, gain, knee, black level |
| Indicators on rear panel | LED for power and trigger input |
| Operating Temperature | -10°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 90% |
| Vibration | 3G (15Hz to 200 Hz XYZ) |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC ±10% 6 W |
| Lens mount | C-mount (Max 4.0 mm thread) |
| Dimensions (H x W x L) | 50 mm x 60 mm x 99 mm |
| Weight | 400 g |