JAI Pulnix : TM-775NIR
Monochrome Interlaced Scan 1/2" CCD Near Infrared (NIR) Camera
JAI Pulnix Industrial-Grade Cameras
Description
The JAI TM-775NIR provides users with a 1/2″ format interlaced camera with sensitivity equal to or greater than many 2/3″ cameras. The Sony ICX428AL CCD imager offers superior light gathering ability due to its advanced micro lens technology and its extended sensitivity in the near-infrared (NIR) portion of the spectrum.
An integrated lens controller enables users to remotely operate the TM 775NIR motorized lenses, pan & tilt heads, or any 3 external control channels. The single 15-pin connector is used for power, camera control, and video output, making installation clean and simple. All camera features are controllable via RS-232 commands over this single interface cable.
Designed with small size and ruggedness in mind, the TM775NIR camera is suitable for a wide range of industrial, defense, and homeland security applications. Advanced options include Auto Level Control (ALC) to automatically adjust gain and shutter settings during changing light conditions; conformal coating; pixel blemish compensation; and extended temperature capability for operating in temperatures from -40 degrees C to 65 degrees C.
Features
→ Monochrome interlaced cameras
→ 1/2" NIR high resolution interline transfer CCD
→ 768 x 494 resolution @ 30 fps (EIA)
→ Micro size, rugged construction
→ Shutter from 1/60 to 1/100,000 sec.
→ RS-232 adjustable manual gain, selectable ALC modes (optional), shutter, gamma and field/frame select
→ External sync in
→ Mount positionable on all four sides
→ Single 15 D-sub connector for video, RS-232 and power
→ Mirror Image, horizontal-enable/disable capability
→ 3-axis control for lens control or pan/tilt
→ High sensitivity option for low light applications
Specifications
| Sensor | 1/2" CCD NIR interlace ICX428AL |
| Active pixels | 768 (H) x 494 (V) |
| Chip size | 7.4 x 5.95 mm |
| Cell size | 8.4 μm x 9.8 μm |
| Scanning | 525 lines / 60 Hz |
| Synchronization | Internal/external auto switch, HD/VD 4.0 Vp-p impedance 10K ohm, VD = interlace/non-interlace, HD = 15.73 kHz ± 5% |
| TV resolution | 570 (H) x 350 (V) |
| S/N ratio | >53 dB min. (AGC Off) |
| Sensitivity | 0.10 lux (f=1.4) |
| High sensitivity option | Up to 100X increase in low-light sensitivity (reduced resolution) |
| Video output | 1.0 Vp-p composite video, 75 ohm |
| Gamma | 0.45 / 1.0 (RS-232 controlled) 1.0 Factory Default |
| Lens mount | C-mount (adjustable) |
| Power requirement | 12V DC, 150 mA typical at 25° C |
| Operating temperature | -10° C to 50° C |
| Storage temperature | -50° C to 70° C |
| Vibration | 7 Grms (20 Hz to 2000 Hz) Random |
| Shock | 70 G, 11 ms, half-sine |
| Dimensions | (H x W x L) 32 x 42 x 48.48 mm with mechanical enclosure, 29.3 x 39.4 x 35.66 mm without mechanical enclosure |
| Weight | 113 g with mechanical enclosure, 69 g without mechanical enclosure. |