
NVT : NV-8PS42-PVD
Description
The NVT 8-Channel Power Supply StubEQ Active Receiver Hub NV-8PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQ Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 1 Amp per channel for cable runs up to 1,500ft (460m).
The NV-8PS42-PVD built-in StubEQ video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: per channel automatic-reset fault protection, transient protection, ground loop free individually floating outputs, and power and video diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVTs lifetime warranty.
Features
NV-8PS42-PVD features include:
→ Provides Class 2 SELV 28 VAC with up to 1 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5cable for each camera
→ Built-in distribution amplifier with 2 video outputs per channel
→ Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
→ Adaptive StubEQ fully automatic 2-band equalization provides adjustment free equalization every time, no manual adjustments required
→ Frequency Response DC to 10 MHz
→ Automatic-reset fault protection; transient protection
→ Individually floating power outputs and differential video inputs ensure total ground-loop immunity
→ Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
→ Limited lifetime warranty
Specifications
Video Frequency response | DC to 10 MHz |
Video Attenuation | 0.5 dB typ |
Video Common-mode / Differential-mode rejection | 15 KHz to 5 MHz 60 dB typ |
Video Impedance | Coax, female BNC 75 ohms |
Video Impedance | UTP, RJ45 100 ohms |
Video Network Wiring | One four-pair Category cable |
Camera Power | Each camera is powered by a fully isolated (floating) 28VAC Class 2SELV output at up to 1 Amp. Individually thermistor protected for auto-reset |
Power inlet | IEC with molded power cord (included) |
Voltage | 115 / 230V |
Current | 2.5 / 1.25 Amps |
Protection | 5x20mm type T fuse 5 Amp 250V |
Wattage | 250 Watts |
Heat | (NV-8PS42-PVD only) 250 BTU / Hour; (NV-8PS42-PVD with cameras) 1,000 BTU / Hour |
Ambient Temperature | -4 to 122 °F (-20 to 50 °C) |
Minimum airflow | 4ft3/min (0,1m3/min) |
Humidity | (non-condensing) 0 to 95% |
Transient Immunity | per ANSI / 587 C62.41 |
Dimensions, including connectors | 19in wide, 1.7in high, 8in deep 43cm wide, 4,5cm high, 20cm deep |
Product Weight | 13lb (5,90kg) |
Packaged Weight | 17lb (7,7kg) |
Mounting Included | Rack mount L brackets for front, rear, or wall installations; rubber feet for desk applications |
Cables Included | Eight 2ft (60cm) coax jumpers, Molded IEC power inlet cord 7ft (200cm) |
Mounting Optional | NV-RMBK2 Rear Mount Support Kit (designed for use with thinner metal equipment racks) NV-WMBK2 Wall Mount Bracket Kit (heavy duty) |
Resources & Documents
nv-8ps42-pvd.pdf | Datasheet |