JAI : CM-140PMCL
Description
The CM-140PMCL is a monochrome progressive scan camera with 1.4 million pixels resolution with Mini-CL interface and Power over CL (PoCL). CM 140PMCL outputs 31 full frames/second in continuous (free-run) mode and up to 30 frames/second in external trigger modes. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes. For proper and safe operation, the PoCL cameras require a compatible frame grabber. The CM140PMCL camera complies with the “Safe Mode” feature stipulated by the PoCL standard.
Features
→ C3 Compact series
→ 1/2" monochrome progressive scan camera
→ Power over Camera Link (PoCL)
→ 1392 (h) x 1040 (v) active pixels
→ 4.65 micro m square pixels
→ 31 frames/second with full resolution in continuous operation
→ 30 frames/second with external trigger and full resolution
→ Up to 74 frames/second with partial scan
→ 48 frames/second with vertical binning (CM-140 MCL only)
→ Shutter speed from 30.5 micro s to 2 sec. using Pulse Width Control
→ Programmable exposure from 61 micro s to 32 ms
→ Pre-select and Pulse width trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output allows a wider range of light
→ 10 or 8-bit output
→ Partial scan and v. binning
→ Mini-CL interface
→ Setup by Windows 2000/XP via serial communication
Specifications
| Sensor | 1/2" progressive scan CCD |
| Pixel Clock | 65 MHz |
| Frame rate full frame | 31 frames/sec. |
| Active area | 6.4 (h) x 4.8 (v) mm |
| Cell size | 4.65 (h) x 4.65 (v) micro m |
| Active pixels | 1392 (h) x 1040 (v) |
| Read-out modes, Full | 1392 (h) x 1040 (v) 31.08 fps |
| Read-out modes, 2/3 partial scan | 1392 (h) x 694 (v) 39.97 fps |
| Read-out modes, 1/2 partial scan | 1392 (h) x 520 (v) 46.57 fps |
| Read-out modes, 1/4 partial scan | 1392 (h) x 269 (v) 61.92 fps |
| Read-out modes, 1/8 partial scan | 1392 (h) x 130 (v) 73.97 fps |
| Read-out modes, Vertical binning | (CM-140PMCL only) 1392 (h) x 527 (v) 48.87 fps |
| Sensitivity | (CM-140 PMCL) 0.3 Lux (On sensor, Max. gain, Shutter OFF,50% video) |
| S/N ratio | >50dB (0 dB gain) |
| Video output | 8 or 10 bit in Mini-CL |
| Auto-iris lens video | 0.7 Vp-p |
| Gain | Manual, -3dB to 12dB |
| Synchronization | Int. X-tal or ext. trigger |
| Inputs, Camera Link | Ext. trigger, LVDS (CC 1) |
| Inputs, TTL | Ext. trigger 4V ±2V |
| Outputs, Camera Link | Clk., FVAL, LVAL, Data, EEN |
| Outputs, TTL | XEEN |
| Trigger modes | Pre-select, Pulse Width, Reset Continuous |
| Electronic shutter, Pre-set shutter | 1/31 to 1/10,000 in 9 fixed steps |
| Electronic shutter, Programmable exposure | 2L (64 micro s) to 1052L (40ms) in 1L steps |
| Electronic shutter, Pulse Width Control | 32 micro s to 2 sec. |
| Accumulation | Auto-detect LVAL-synchr. / asynchr. |
| Control interface | Mini-CL serial communication |
| Functions controlled by serial communication | Shutter, Trigger mode, Readout mode, Scanning, Trigger Polarity, Black level, Gain, |
| Indicators on rear panel | LED for power and trigger input |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 90% non-condensing |
| Vibration | 10G (20Hz to 200Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC ±10% 3 W (PoCL) |
| Lens mount | C-mount |
| Dimensions | (H x W x L) 29 x 44 x 66 mm |
| Weight | 115 g |
Resources & Documents
| cm-140pmcl_cb-140pmcl.pdf | Datasheet |