JAI : BM-500GE
Description
BM-500GE A unique feature of BM-500GE is its sequence trigger mode, which allows the user to pre-select a combination of gain, offset and Region of Interest (ROI) that can be changed on-the-fly.
The camera utilizes the Sony ICX625 CCD and operates at 15 frames/second in continuous mode even with a 5 megapixel resolution, thanks to a well-crafted analog front end design. Partial scan and binning modes are also provided.
Features
→ 2/3" Monochrome progressive scan CCD
→ Member of C3 Basic series
→ 2456 (h) x 2058 (v) 3.45 micro m square pixels
→ 15 frames/second with full resolution in continuous operation
→ 15 frames/second with external trigger and full resolution
→ Increased frame rate with vertical binning (BM-500 GE) and partial scan
→ Sequencer trigger mode for on-the-fly change of gain, exposure and ROI
→ Edge Pre-Select and Pulse Width trigger modes
→ Exposure time from 64 micro s to 2 sec. using Pulse Width Control trigger mode
→ Programmable exposure from 64 micro s to 66 ms in Full Frame scan
→ Several pre-processing functions for offloading host PC
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output allows a wider range of light
→ Partial scan
→ Pre-processing functions inside the camera
→ GigE Vision interface with 12, 10 or 8-bit output
→ Programmable GPIO with opto-isolated inputs and outputs
→ Comprehensive software tools and SDK for Windows XP/Vista
→ Synchronization Internal X-tal, External hardware trigger via GPIO; Software trigger via GigE Vision
Specifications
| Sensor | 2/3" progressive scan CCD |
| Pixel Clock | 60 MHz |
| Frame rate full frame | 15 frames/second |
| Active area | 8.45 (h) x 7.10 (v) |
| Cell size | 3.45 (h) x 3.45 (v) |
| Active pixels | 2456 (h) x 2058 (v) |
| Read-out modes, Full | 2456 (h) x 2058 (v) 15 fps |
| Read-out modes, 1/2 partial scan | 2456 (h) x 1028 (v) 24 fps |
| Read-out modes, 1/4 partial scan | 2456 (h) x 514 (v) 34 fps |
| Read-out modes, 1/8 partial scan | 2456 (h) x 258 (v) 43 fps |
| Read-out modes, 2/3 partial scan | 2456 (h) x 1372 (v) 20 fps |
| Read-out modes, Vertical binning | (BM-500 GE only) 2456 (h) x 1029 (v) 23 fps |
| Read-out modes, Region-of-interest (ROI) | User definable. Memory read-out |
| Sensitivity | (BM-500 GE) 0.34 Lux (On sensor, max. gain, shutter off, 50% video) |
| S/N ratio | >50 dB (0 dB gain) |
| Video output | GigE Vision, 8-bit, 10-bit or 12-bit |
| Auto-iris lens video output | 0.7 Vp-p, enabled by internal switch |
| Gain | Manual/Automatic, Range -3 to 12 dB |
| GPIO Module, Input/output switch | Configurable 16-in / 12-out switch |
| GPIO Module, Clock generator (one) | 12-bit counter based on Pixel clock |
| GPIO Module, Pulse generators (four) | 20-bit counter programmable for length, start point, stop point, repeat |
| Trigger modes | Pre-Select, Pulse Width, Frame Delay and Sequence |
| Electronic shutter, Pre-set shutter | 1/15 and 1/30 to 1/10,000 in 10 steps |
| Electronic shutter, Programmable exposure (PE) | 2L(64 micro s) to 2072 L (66.44ms) in 1L steps |
| Electronic shutter, Exposure Time (Abs) | micro sec Â- user definable. Same range as PE |
| Electronic shutter, Pulse Width | 64 micro s to 2 sec. |
| Pre-processing functions | Output transfer functions (Gamma, multiple-point knee),Bayer white balance, L/R channel balancing, Blemish compensation |
| Control interface | Register based. GigE Vision/GenICam compliant |
| Functions controlled via GigE Vision interface | Shutter, Gain, Black Level, Trigger mode, Read-out mode, GPIO setup, ROI (GenICam mandatory functions) |
| GigE Vision streaming control | Packet size (1428 to 4036 bytes), Delayed (Frame) read-out, inter-packet delay |
| Indicators on rear panel | Power/Hardware trigger, GigE Link, GigE activity |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 90% |
| Vibration | 10G (20Hz to 200 Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC /-10%. 5.8W |
| Lens mount | C-mount |
| Dimensions (H x W x L) | 55 x 55 x 55 |
| Weight | 210 g |
Â
Resources & Documents
| bm-500ge_bb-500ge.pdf | Spec Sheet |