(discontinued)1/3″ Monochrome Progressive Scan GigE Vision Camera
Products that are no longer being manufactured. Please contact us for a replacement option.
Discontinued : CM-030GE
Description
This product has been discontinued as of March, 2019. For an alternative solution, please contact sales.
The CM-030GE is a monochrome progressive scan camera with VGA resolution and GigE Vision interface. CM 030GE camera utilizes the Sony ICX424 CCD and outputs 90 full frames/second in continuous (free-run) mode. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes. The unique sequencer function makes it possible to change exposure time, gain and ROI on the fly.
The CM030GE can be equipped with a factory-installed Right Angle Adapter. The adapter enables the camera to “look” at a 90 degree angle and is designed for a range of inspection tasks where physical access on production lines is limited.
Features
→ 1/3" monochrome progressive scan camera
→ Member of C3 Compact series, covering VGA to UXGA resolution
→ 656 (h) x 494 (v) 7.4 micro m square pixels
→ 90 frames/second with external trigger and full resolution
→ Increased frame rate with vertical binning (CM-030 GE) and partial scan
→ Exposure time from 21.6 micro s to 2 sec. using Pulse Width trigger mode
→ Programmable exposure from 43.2 micro s to 11.037 ms in Full Frame scan
→ Sequencer trigger mode for on-the-fly change of gain, exposure and ROI
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output allows a wider range of light
→ GigE Vision interface with 10 or 8-bit output
→ Partial scan and vertical binning
→ Unique sequencer function
→ Programmable GPIO with opto-isolated inputs and outputs
→ Comprehensive software tools and SDK for Windows XP/Vista
→ Synchronization Internal X-tal, External hardware trigger via GPIO Software trigger via GigE Vision
→ Lens mount C-mount
Specifications
| Sensor | 1/3" progressive scan CCD |
| Pixel Clock | 40 MHz |
| Frame rate full frame | 90.5 frames/second (511 lines/frame) |
| Active area | 4.9 (h) x 3.7 (v) mm |
| Cell size | 7.4 (h) x 7.4 (v) micro m |
| Active pixels | 656 (h) x 494 (v) |
| Read-out modes, Full | 656 (h) x 494 (v) 90.5 fps |
| Read-out modes, 1/2 partial scan | 656 (h) x 246 (v) 159 fps |
| Read-out modes, 1/4 partial scan | 656 (h) x 122 (v) 255 fps |
| Read-out modes, 1/8 partial scan | 656 (h) x 62 (v) 361 fps |
| Read-out modes, 2/3 partial scan | 656 (h) x 326 (v) 128 |
| Read-out modes, Vertical binning | (CM-030 GE only) 656 (h) x 247 (v) 166.2 fps |
| Read-out modes, Region-of-interest (ROI) | User definable. Memory read-out |
| Sensitivity | (CM-030GE) 0,05 Lux Lux (On sensor, max. gain, shutter off, 50% video) |
| S/N ratio | >50dB (0 dB gain) |
| Video output | GigE Vision, 8-bit or 10-bit |
| Auto-iris lens video output | 0.7 Vp-p, enabled by internal switch |
| Gain | Manual -3 to 24 dB |
| GPIO Module, Input/output switch | Configurable 14-in/9-out switch (LUT) |
| GPIO Module, Clock generator (one) | 12-bit counter based on 25MHz clock or Pixel Clock |
| GPIO Module, Pulse generators (four) | 20-bit counters programmable for length, start point, stop point, repeat |
| Hardware trigger modes | Continuous, Pre-Select, Pulse Width, Frame Delay, Sequence (Gain, Shutter, ROI) |
| Electronic shutter, Pre-set shutter | 1/90 to 1/10,000 in 9 steps |
| Electronic shutter, Programmable exposure | 2L (43.2 micro s) to 511L (11.037ms) in 1L steps |
| Electronic shutter, Exposure Time (Abs) | Same range as PE |
| Electronic shutter, Pulse Width | max. 2 sec (Can be set by 100 micro s unit or Pixel Clock unit) |
| GPIO plus Pulse Width | Register based GigE Vision (GenICam compliant) |
| Functions controlled via GigE Vision interface | Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions) |
| GigE Vision streaming control | Packet size, Delayed (frame) Readout, Inter-packet delay |
| Indicators on rear panel | Power/Hardware trigger, GigE link, GigE activity |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 90% |
| Vibration | 10 G (20Hz to 200 Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC /-10%. 3.6 W |
| Dimensions (H x W x L) | 29 x 44 x 75 mm |
| Weight | 125 g |
Resources & Documents
| cb-cm030.pdf | Datasheet |