JAI : CM-030PMCL-RH
Description
This product has been discontinued. For an alternative solution, please contact sales.
The CM-030PMCL-RH is a remote head (2m cable), monochrome progressive scan camera with 0.3 million pixels resolution with Mini-CL interface and Power over CL (PoCL).
The CM 030PMCL-RH camera utilizes the Sony ICX424 CCD and outputs 120 full frames/second in continuous (free-run) mode. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.
For proper and safe operation, the PoCL cameras require a compatible frame grabber. The CM030PMCL-RH camera complies with the “Safe Mode” feature stipulated by the PoCL standard.
Features
→ C3 Compact series 1/3" progressive scan camera
→ Monochrome Remote head Camera with a 2 m cable
→ 659 (h) x 494 (v) active pixels
→ 7.4 μm square pixels
→ 120 frames/second with external trigger and full resolution
→ Increased frame rate with vertical binning and partial scan (Up to 504 fps)
→ Exposure time from 32.48μs to 2 sec. using Pulse Width Control
→ Programmable exposure from 32.48μs to 8.299 ms by 1 LVAL (16.24μs) increments
→ Pre-select, Pulse width and Pre-select with Smear Less trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ PoCL (Power over CL) standard compliant
→ 10 or 8-bit output
→ Mini-CL interface
→ Setup by Windows NT/2000/XP via serial communication
Specifications
| Sensor | 1/3" progressive scan CCD |
| Pixel clock | 58 MHz |
| Frame rate full frame | 120 frames/second(511 lines/frame) |
| Active area | 6.4 (h) x 4.8 (v) |
| Cell size | 7.4 (h) x 7.4 (v) |
| Active pixels | 659 (h) x 494 (v) |
| Read-out modes, Full | 659 (h) x 494 (v) 120.491 fps. |
| Read-out modes, 1/2 partial scan | 659 (h) x 246 (v) 216.80 fps. |
| Read-out modes, 1/4 partial scan | 659 (h) x 122 (v) 349.83 fps. |
| Read-out modes, 1/8 partial scan | 659 (h) x 60 (v) 504.72 fps. |
| Read-out modes, 2/3 partial scan | 659 (h) x 328 (v) 172.95 fps. |
| Read-out modes, Vertical binning | 659 (h) x 247 (v) 193.88 fps. |
| Read-out modes, Region-of-interest (ROI) | 659 (h) x 494 (v) 120.491 fps. |
| Sensitivity | 0.3 Lux (On sensor, max gain, shutter off, 50% video) |
| S/N ratio | >50dB (0 dB gain) |
| Video output | Camera Link, 8-bit or 10-bit |
| Auto iris lens video output | 0.7 Vp-p |
| Gain | Manual/Automatic Range -3 to 24 dB |
| Synchronization | Int. X-tal or ext. trigger |
| Inputs, Camera Link | Ext. trigger, LVDS (CC 1) |
| Inputs, TTL | Ext. trigger 4V ±2V |
| Outputs, Camera Link | Clk., FVAL, LVAL, Data, EEN |
| Outputs, TTL | XEEN |
| Trigger modes | Pre-select, Pulse Width, and Pre-select |
| Electronic shutter, Pre-set shutter | 1/120 to 1/30,000 in 9 steps |
| Electronic shutter, Programmable exposure (PE) | 2L (32.48μs) to 511L (8.299ms) |
| Electronic shutter, Pulse Width | 32.48μs to 2 sec. |
| Control interface | Mini-CL serial communication |
| Functions controlled via serial communication | Shutter, Trigger mode, Readout mode,Trigger Polarity, Black level, Gain |
| Indicators on rear panel | LED for power and trigger input |
| Operating temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C/20% to 90% |
| Vibration | 10G (20Hz to 200Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC /-10%. <0.3A |
| Lens mount | f 17mm Exclusive mount |
| Dimensions | (H x W x L) Head f17 x 46mm ( f x D ) with 2m cable; CCU 44 x 29 x 66 mm (H x W x D) |
| Weight | Head with 2m cable 120g, CCU 120g |