JAI : CM-200PMCL
Description
The CM-200PMCL is a monochrome progressive scan camera with 2 million pixels resolution and Mini-CL interface. CM 200PMCL outputs 25 full frames/second in continuous (free-run) mode and up to 24 frames/second in external trigger modes. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.
For proper and safe operation, the PoCL cameras require a compatible frame grabber. The CM200PMCL camera complies with the “Safe Mode” feature stipulated by the PoCL standard.
Features
→ Compact series 1/1.8" monohrome progressive scan camera
→ Power over Camera Link (PoCL)
→ 1620 (h) x 1236 (v) pixels active area
→ 4.4 micro m square pixels
→ 25 frames/second with full resolution in continuous operation
→ Up to 24 frames/second with external trigger and full resolution
→ Up to 89 frames/second with partial scan
→ 48 frames/second with vertical binning
→ Shutter speed from 32 micro s to 2 sec. using Pulse Width Control
→ Programmable exposure from 64 micro s to 40 ms
→ Pre-select and Pulse width trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto-iris lens video output allows a wider range of light
→ 10 or 8-bit output
→ Mini-CL interface
→ Setup by Windows NT/2000/XP via serial communication
Specifications
| Sensor | 1/1.8" progressive scan CCD |
| Pixel Clock | 65 MHz |
| Frame rate full frame | 24.98 frames/sec.(1251 lines per frame) |
| Active area | 7.13 (h) x 5.44 (v) mm |
| Cell size | 4.4 (h) x 4.4 (v) micro m |
| Active pixels | 1620 (h) x 1236 (v) |
| Read-out modes, Full | 1620 (h) x 1236 (v) 24.98 fps |
| Read-out modes, 1/2 partial scan | 1620 (h) x 712(v) 43.89 fps |
| Read-out modes, 1/4 partial scan | 1620 (h) x 448 (v) 69.75 fps |
| Read-out modes, 1/8 partial scan | 1620 (h) x 316 (v) 98.89 fps |
| Read-out modes, 2/3 partial scan | 1620 (h) x 888 (v) 35.19 fps |
| Read-out modes, Vertical binning | 1620 (h) x 627 (v) 48.87 fps (CM-200PMCL only) |
| Sensitivity | (CM-200 MCL) 0.25 Lux (On sensor, Max. gain, Shutter OFF,50% video) |
| S/N ratio | >50dB (0 dB gain) |
| Video output | 8 or 10 bit in Mini-CL |
| Auto-iris lens video | 0.7 Vp-p |
| Gain | Manual, -3dB to 24dB |
| Synchronization | Int. X-tal or ext. trigger |
| Inputs, Camera Link | Ext. trigger, LVDS (CC 1) |
| Inputs, TTL | Ext. trigger 4V ±2V |
| Outputs, Camera Link | Clk., FVAL, LVAL, Data, EEN |
| Outputs, TTL | XEEN |
| Trigger modes | Pre-select, Pulse Width |
| Electronic shutter, Pre-set shutter | 1/24 to 1/10,000 in 10 steps |
| Electronic shutter, Programmable exposure | 2L (64 micro s) to 1052L (40ms) in 1L steps |
| Electronic shutter, Pulse Width Control | 32 micro s to 2 sec. |
| Accumulation | Auto-detect LVAL-synchr. / asynchr. |
| Control interface | Mini-CL serial communication |
| Functions controlled by serial communication | Shutter, Trigger mode, Readout mode, Trigger Polarity, Black level, Gain |
| Indicators on rear panel | LED for power and trigger input |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 90% |
| Vibration | 10G (20Hz to 200Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC ±10% 3 W (PoCL) |
| Lens mount | C-mount |
| Dimensions | (H x W x L) 29 x 44 x 66 mm |
| Weight | 115 g |
Resources & Documents
| cm-200pmcl_cb-200pmcl.pdf | Datasheet |