(discontinued) 1/2" Monochrome Progressive Scan Camera With Mini Camera Link Interface
Products that are no longer being manufactured. Please contact us for a replacement option.
Discontinued : CM-040MCL
Description
This item is DISCONTINUED.
The CM-040MCL is a 1/2″ monochrome progressive scan camera with 776 (h) x 582 (v) active pixels and Mini Camera Link interface. CM 040MCL camera utilizes the Sony ICX415 CCD and outputs 61 frames/second with full resolution. Higher frame rates can be achieved by using the partial scan or vertical binning modes. The CM040MCL is available with a factory-installed Right Angle Adapter. The adapter enables the camera to “look” at a 90 degree angle and is designed for a range of inspection tasks where physical access on production lines is limited.
Features
→ 1/2" monochrome progressive scan camera
→ Compact series 1/2" progressive scan camera
→ 776 (h) x 582 (v) active pixels
→ 8.3 micro m square pixels
→ 61.15 frames/second with full resolution in continuous operation
→ 60 frames/second with external trigger and full resolution
→ Up to 280 frames/second with partial scan
→ 111 frames/second with vertical binning (CM-040 MCL only)
→ Shutter speed from 27.437 micro s to 2 sec. using Pulse Width Control
→ Programmable exposure from 54.874 micro s to 16.553 ms
→ Pre-select and Pulse width trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output to support dynamic lighting conditions
→ 10 or 8-bit output
→ Mini Camera Link interface
→ Auto iris lens video output to support dynamic lighting conditions
→ Setup by Windows NT/2000/XP via serial communication
→ Right angle adapter (optional)
Specifications
| Sensor | 1/2" progressive scan CCD |
| Pixel Clock | 33.75 MHz |
| Frame rate full frame | 61.15 frames/second (596 lines per frame) |
| Active area | 6.49 (h) x 4.83 (v) mm |
| Cell size | 8.3 x 8.3 micro m |
| Active pixels | 776 (h) x 582 (v) |
| Read-out modes, Full | 776 (h) x 582 (v) 61 fps |
| Read-out modes, 2/3 partial scan | 776 (h) x 390(v) 87 fps |
| Read-out modes, 1/2 partial scan | 776 (h) x 294 (v) 110 fps |
| Read-out modes, 1/4 partial scan | 776 (h) x 146 (v) 186 fps |
| Read-out modes, 1/8 partial scan | 776 (h) x 74 (v) 280 fps |
| Read-out modes, Vertical binning | 776 (h) x 291 (v) 111 fps**NOTE: CM-040 MCL only |
| Sensitivity | (CM-040 MCL) 0.2 Lux (On sensor, Max. gain, shutter off, 50% video) |
| S/N ratio | >50dB (0 dB gain) |
| Video output | 8 or 10 bit in Mini-CL |
| Auto-iris lens video | 0.7 Vp-p |
| Gain | Manual, -3dB to 24dB |
| Synchronization | Int. X-tal or ext. trigger |
| Inputs, Camera Link | Ext. trigger, LVDS (CC 1) |
| Inputs, TTL | Ext. trigger 4V ±2V |
| Outputs, Camera Link | Clk., FVAL, LVAL, Data, EEN |
| Outputs, TTL | XEEN |
| Trigger modes | Pre-select, Pulse Width |
| Electronic shutter, Pre-set shutter | 1/60 to 1/10,000 in 10 steps |
| Electronic shutter, Programmable exposure | 2L (54.87 micro s) to 596L (16.353ms) in 1L steps |
| Electronic shutter, Pulse Width Control | 27.437 micro s to 2 sec. |
| Accumulation | Auto-detect LVAL-synchr. / asynchr. |
| Control interface | Mini-CL serial communication |
| Functions controlled by serial communication | Shutter, Trigger mode, Readout mode, Trigger Polarity, Black level, Gain, Indicators on rear panel: LED for power and trigger input |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 90% |
| Vibration | 10G (20Hz to 200 Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC ±10% 3 W |
| Lens mount | C-mount |
| Dimensions | (H x W x L) 29 x 44 x 66 mm (CM/CB-040 MCL) |
| Weight | 115 g (CM/CB-040 MCL) |
Resources & Documents
| cm-040mcl_cb-040mcl.pdf | Datasheet |