Board Camera

The Sentech EGE-F-42P high-resolution, 1/4" CCD with a flexible printed circuit cable (FPC) connecting the main camera boards and the CCD board.

The Sentech EGEF42P offers a very flexible integration to almost any application. Sentech also offers a two-headed version of this camera for very special applications.

Type	Board
Image Sensor	1/4" IT Color CCD (ICX428AK)
Horizontal Resolution	480 TV Lines
Signal Format	PAL
Frame Rate	30fps
Effective Picture Element	768 x 494 (PAL)
Vertical Frequency	59.94Hz (PAL)
Horizontal Frequency	15.734kHz (PAL)
Connection CCU	Flex Ribbon Cable (length can vary 1 to 6 inches)
Sync System	Internal
Electronic Iris	1/60 ~ 1/10,000 Second
Electronic Shutter	Extended Intergration: 2FLD to 16FLD (8 Steps), High Speed: 1/60 (1/50) ~ 1/10,000 (8 Steps)
Minimum Illumination	0.41 Lux @ F1.2, 20 IRE; 1.63 Lux @ F1.2, 50 IRE
S/N Ratio	>48 dB (AGC Off)
Gamma	0.45 (DSP Adjustable)
AGC	On/Off (0 to 18 dB)
Video Output	1.0 Vp-p, 75Ω
Y/C Output	1.0 Vp-p, 75Ω
White Balance	Auto / Manual / Push-toSet
Aperture Gain	Off/On (On has two levels- user definable) 2-bit - status output
Status FeedBack	2-Bit status output
Negative Positive	DSP Selectable
Back Light	Back light compensation at electronic shutter
Power	Supply Voltage: 6-8V DC, Consumption: 1.92W, 240mA, Variation is CCD Dependant
Operating Temperature	-10°C ~ 45°C (14°F ~ 113°F)
Storage Temperature	-30°C ~ 60°C (-22°F ~ 140°F)
Dimensions	CCU: 26 (W) x 20 (H) x 60 (L) mm (1.04" x .8" x 2.4")
Dimension Head	CCD Head: 12 (W) x 12 (H) x mm (.48" x .48")
Weight	26g (.91 oz.)