(discontinued)1/3″ Monochrome Progressive Scan Camera
Products that are no longer being manufactured. Please contact us for a replacement option.
Discontinued : CV-A11
Description
This product has been discontinued. For an alternative solution, please contact sales.
The JAI CV A11 has a footprint of merely 44 x 66 mm (width x length) and height of 29 mm and boasts a long list of new functions and features. These include RS 232C control of all settings of the camera, a number of new trigger modes and readout modes.
The target market for the CV A11 camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).
Features
→ Compact 1/3" monochrome progressive scan camera
→ 648 (h) x 492 (v) 7.4 μm square pixels
→ 30 frames/second with full resolution in continuous operation
→ High S/N ratio >56 dB
→ Increased frame rate with partial scan
→ Exposure time from 76μs μs to 116 ms using Pulse Width Control mode
→ Programmable exposure from 76 μs to 60 ms
→ Frame-delay readout mode for multiplexed readout of up to 3 cameras
→ Internal, external HD/VD or random trigger synchronization
→ Smear reduction readout mode
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Exposure enable (EEN), Write enable (WEN) and Pixel Clock output
→ Setup by Windows NT/2000/XP via serial communication
Specifications
| Sensor | 1/3" progressive scan |
| Pixel Clock | 12.2727 MHz |
| Frame rate full frame | 29.96 frames/second (525 lines per frame) |
| Active area | 4.8 (h) x 3.6 (v) mm |
| Cell size | 7.4 x 7.4 pixels |
| Active pixels | 648 x 492 |
| Read-out modes, Full | 648 (h) x 492 (v) 30 fps |
| Read-out modes, 1/2 partial scan | 648 (h) x 240 (v) 58 fps |
| Read-out modes, 1/3 partial scan | 648 (h) x 160 (v) 73 fps |
| Read-out modes, 1/6 partial scan | 648 (h) x 80 (v) 124 fps |
| Read-out modes, Smear-less | Smear reduction |
| Read-out modes, Frame-delay readout | For multi-camera read-out |
| Sensitivity | 0.05 Lux (On sensor, max. gain, shutter off, 50% video) |
| S/N ratio | >56dB (0dB gain) |
| Video output | Composite VS signal, 1Vp-p, 75 Ω Video signal, 0,7Vp-p (selectable) |
| Gain | Manual, -3 to 12 dB; Automatic, 0 to 12dB |
| Gamma | 0.45 or 1.0 |
| Synchronization | Int. X-tal, Ext. HD/VD or random trigger |
| Inputs, Trigger | 4V, TTL |
| Inputs, HD/VD sync | 4V, 75 Ω or High Z (switchable) |
| Outputs, HD / VD sync. | 4V, 75 Ω |
| Outputs, WEN (Write Enable) | 4V, 75 Ω |
| Outputs, EEN (Exposure Enable) | 4V, 75 Ω |
| Outputs, Pixel clock | 4V, 75 Ω |
| Trigger modes | Continuous, EPS (Edge Pre-Select), PWC (Pulse Width Control), Long time exposure, Smear reduction and Frame-delay readout |
| Electronic shutter, Pre-set shutter | 1/30 to 1/200,000 in 16 steps |
| Electronic shutter, Programmable exposure(PE) | 1.3H to 1oooH (75.9 μs to 59.8 ms) |
| Electronic shutter, Pulse Width | 1.3H to 2000H (75.9 μs to 116 ms) |
| Electronic shutter, Long time exposure | 2 frames to 8 |
| Accumulation | HD synchronous or HD asynchronous |
| Control interface | RS-232C, short ASCII commands |
| Functions controlled by RS-232C | Scanning format, Trigger modes,Readout modes, Programmable exposure, Shutter, Gain, Pixel clock output, Sync on/off, Black level, Manual gain, AGC, Gamma |
| Functions controlled by internal DIP-switches | VD input/output, HD input/output, HD/VD 75 Ω termination on/off |
| Operating Temperature | -5 °C to 45 °C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25 °C to 60 °C / 20 to 90% |
| Vibration | 10G (20Hz to 200 Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC /-10%. 1.5W |
| Lens mount | C-mount |
| Dimensions (H x W x L) | 29 x 44 x 66 mm |
| Weight | 150 g |