JAI : CM-040GE
Description
The CM-040GE is a monochrome progressive scan camera with 0.4 million pixels resolution and GigE Vision interface. CM 040GE utilizes the Sony ICX415 CCD and outputs 60 full frames/second in continuous (free-run) mode. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.
The unique sequencer function makes it possible to change exposure time, gain and ROI on the fly and the programmable GPIO allows flexible configuration of inputs/outputs as well as the timer/counter function.
The CM-040GE is available with a factory-installed Right Angle Adapter. The adapter enables the camera to “look” at a 90 degree angle and is designed for a range of inspection tasks where physical access on production lines is limited.
Features
→ 1/2" monochrome progressive scan camera
→ Member of C3 Compact series, covering VGA to UXGA resolution
→ 782 (h) x 582 (v) 8.37 micro m square pixels
→ 61.15 frames/second with full resolution in continuous operation
→ Increased frame rate with vertical binning (CM-040 GE) and partial scan
→ Exposure time from 54.874 micro s to 2 sec. using Pulse Width trigger mode
→ Programmable exposure from 54,874 micro s to 16.353ms in Full Frame scan
→ Sequence trigger mode for on-the-fly change of gain, exposure and ROI
→ LVAL Synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output allows a wider range of light
→ GigE Vision interface with 10 or 8-bit output
→ Partial scan and vertical binning
→ Unique sequencer function
→ Programmable GPIO with opto-isolated inputs and outputs
→ Comprehensive software tools and SDK for Windows XP/Vista
Specifications
| Sensor | 1/2" progressive scan CCD |
| Pixel Clock | 33.75 MHz |
| Frame rate full frame | 61.15 frames/second |
| Active area | 6.49 (h) x 4.83 (v) mm |
| Cell size | 8.3 (h) x 8.3 (v) micro m |
| Active pixels | 776 (h) x 582 (v) |
| Read-out modes, Full | 776 (h) x 582 (v) 61 fps |
| Read-out modes, 1/2 partial scan | 776 (h) x 294 (v) 110 fps |
| Read-out modes, 1/4 partial scan | 776 (h) x 146 (v) 186 fps |
| Read-out modes, 1/8 partial scan | 776 (h) x 74 (v) 280 fps |
| Read-out modes, 2/3 partial scan | 776 (h) x 390 (v) 87 fps |
| Read-out modes, Vertical binning | (CM-040 GE only) 776 (h) x 291 (v) 111 fps |
| Read-out modes, Region-of-interest (ROI) | User Definable. Memory read-out |
| Sensitivity | (CM-040 GE) 0.2 Lux (On sensor, max. gain, shutter off, 50% video) |
| S/N ratio | >50 dB(0 dB gain) |
| Video output | GigE Vision, 8-bit or 10-bit |
| Auto-iris lens video output | 0.7 Vp-p, enabled by internal switch |
| Gain | Manual -3dB to 24 dB |
| Synchronization | Internal X-tal, External hardware trigger via GPIO; Software trigger via GigE Vision |
| GPIO Module, Input/output switch | Configurable 14-in/9-out switch (LUT) |
| GPIO Module, Clock generator (one) | 12-bit counter based on 25MHz clock or Pixel Clock |
| GPIO Module, Pulse generators (four) | 20-bit counters programmable for length, start point, end point, repeat |
| Hardware trigger modes | Continuous, Pre-Select, Pulse Width, Frame delay, Sequence (Gain, Shutter, ROI) |
| Electronic shutter, Pre-set shutter | 1/60 to 1/10,000 in 10 steps |
| Electronic shutter, Programmable exposure | 2L(54.874 micro s ) to 596L (16.353ms) in 1L steps |
| Electronic shutter, Exposure Time (Abs) | micro sec Â- user definable. Same range as PE |
| Electronic shutter, Pulse Width | max. 2 sec. (can be set by 100 micro s unit or Pixel Clock unit) |
| Control interface | Register based GigE Vision/GenICam compliant |
| Functions controlled via GigE Vision interface | Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions) |
| GigE Vision streaming control | Packet size (1428 to 4040bytes), Delayed (frame) readout, Inter-packet delay, |
| Indicators on rear panel | Power / Hardware trigger, GigE link, GigE activity |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 80% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 80% |
| Vibration | 10G (20Hz to 200 Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC /-10%. 3.6W |
| Lens | mount C-mount |
| Dimensions | (H x W x L) 29 x 44 x 75 mm |
| Weight | 125 g |
Â
Resources & Documents
| cm-cb-040.pdf | Datasheet |