Call Now: 1-800-284-2288 |
Quickset QPT-20 Rugged Pan & Tilt Positioners |
|
The Quickset QPT-20 Pan & Tilt positioners are designed for a wide variety of sensor positioning applications. The QPT-20 is rugged and durable enough for virtually any environment, including port surveillance and mobile vehicle vision systems. The QPT-20 can handle payloads up to 8 lbs/ft and provides tabletop and/or tilt axis load mounting for multiple sensor array applications. Digital Serial Integrated Control (IC) units communicate via network interface or through a dedicated controller (e.g. UniCom). If preferred, analog units are available as effective solutions where simple command and control are required without a PC.
→ Payloads up to 8 ft-lbs (10.8 Nm)
→ Analog driven or Digital Serial Integrated Controller (IC) models
→ Mounting platforms include plain formed table top and table top with single tilt-axis connector
→ Internal wire table top for pass-through or IC sensor wiring on certain models
→ Fixed, Inverted or Mobile Installations
→ Mil-Spec Connectors
Load Capacity: 8 lb ft (10.8 Nm) maximum
Operating Voltage Range: 24VDC (±4VDC)
Total Power: Pan & Tilt Axes: 0.85A at 24VDC Heater: 2.7A at 24VDC Standby: <0.1A at 24VDC (no heater current)
Pan-Axis Range: 360° continuous rotation (slip ring) 435° (±217.5°) (non-slip ring)
Pan-Axis Speed: 2° - 35°/sec
Tilt-Axis Range: 180° (±90°)
Tilt-Axis Speed: 1.0° – 12°/sec
Internal Heater: Included standard, thermostatically controlled (0°C (32°F) ON • 1.7°C (35°F) OFF
Operating Temperature: Without Heater: -15°C to 55°C (5°F to 131°F) • With Heater: -30°C to 55°C (-22°F to 131°F)
Rotational Limits: Fixed tilt hard limit, adjustable soft limits on both axes
Feedback: Optical Encoders (0.01° readout) or Potentiometers (0.25° readout)
Repeatability: 0.25°
Duty Cycle: 20%
Motor Type / Drive: Stepper and DC Brush
Communication to Pan & Tilt: RS232 / 422 / 485, IP Ethernet: 10/100 Base-T
Communication to Sensors: RS232 / 422, Ethernet Pass-Through
Control Protocol: QuickSet (standard) and Pelco D (optional)
Connector Specifications: Mil-Spec grade used on all configurations
Load Connector Interfaces: 1 Mil-Spec connector at tilt axis (certain models)
Materials: Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings
Finish / Color: White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
Weight: 14.3 lbs. (6.48 kg) depending on model
qpt-20-specs.pdf | datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|