
Quickset : QPT-130
Description
Tough, durable, and rugged enough to handle virtually any environment, the Quickset QPT-130 can handle your payloads up to 130 ft./lbs. Integrated Control (IC) units can communicate via networked PC or separate controller. Analog units are inexpensive solutions where simple command and control are required without a PC.
Features
→ Payloads up to 130 lb ft
→ Analog driven or Digital Serial Integrated Controller (IC) models
→ Internal wire table top for pass-through or IC sensor wiring on certain models
→ Fixed, Inverted or Mobile Installations
→ Mil-Spec Connectors
→ Tough metal housing and gearing for durability in harsh environments
Specifications
Load Capacity: 130 lb-ft (176 Nm) maximum
Operating Voltage Range: 24VDC (±4VDC)
Pan-Axis Range: 360° continuous rotation (slip ring) • 435° (±217.5°) (non-slip ring)
Pan-Axis Speed: 1° - 8°/sec
Tilt-Axis Range: 180° (±90°)
Tilt-Axis Speed: 1° – 4.5°
Internal Heater: Thermostatically controlled 0°C (32°F) ON • 1.7°C (35°F) OFF
Operating Temperature: Without Heater: -15°C to 55°C (5°F to 131°F) • With Heater: -30°C to 55°C (-22°F to 131°F)
Rotational Limits: Fixed tilt hard limit, adjustable soft limits on both axes
Feedback: Resolvers (0.01° readout)
Repeatability: 0.25°
Duty Cycle: 20%
Motor Type / Drive: DC Brush
Communication to Pan & Tilt: RS232 / 422 / 485, IP Ethernet: 10/100 Base-T
Communication to Sensors: RS232 / 422, Ethernet Pass-Through
Control Protocol: Moog QuickSet or Pelco D
Connector Specifications: Mil-Spec grade used on all configurations
Materials: Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings
Finish / Color: White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
Weight: 22 lbs (10 kg) to 36 lbs (16.3 kg) depending on model
Dimensions: See page 4
Test Cable and Software: 6 ft test cable and software included with all IC and Sentry configurations
Resources & Documents
qpt-130_pan_tilt_specs.pdf | datasheet |