
JAI : CV-M7+CL
Description
This product has been discontinued. For a replacement, please contact sales.
The JAI CV-M7 CL is a 1.4 megapixel progressive scan color camera suitable for a wide range of machine vision applications.
The CV M7 CL features several special functions ideal for Intelligent Traffic Systems (ITS) applications. The camera outputs 24 full frames/second. Higher frame rates are possible by using partial scan.
Based on 10-bit A/D technology, theCVM7 CL utilizes proprietary sample and hold and correlated double sampling (CDS) techniques to achieve double-speed readout without trade-offs in dynamic range or image fidelity. The CV-M7 CL uses a 2/3″ format Bayer mosaic progressive scan CCD sensor, in conjunction with a monolithic IR-cut/optical low pass filter, for superior color rendition.
Features
→ Digital 2/3" color progressive scan CCD camera
→ RGB primary color mosaic filter (Bayer) for host based RGB decoding
→ 1392 (h) x 1040 (v) 6.45 μm square pixels
→ Extended sensitivity compared with CV-M7
→ Host based color interpolation
→ 8 bit video output as LVDS (EIA 644) using 10 bit internal processing
→ Camera Link version with 10 bit video output
→ Full 1380 (h) x 1030 (v) frame readout in 1/24 second
→ Partial scan to 1/2, 1/4 and 1/8 for higher frame rate
→ Edge pre-select and pulse width external trigger modes
→ Frame-delay and smearless readout modes
→ Multiple exposure with up to 6 exposures within a single frame
→ Shutter speeds from 1/24 to 1/10,000 second in 10 steps
→ Trigger and timing signals as LVDS or via Camera Link
→ Setup by switches or serial control (short ASCII commands)
→ Windows 98/NT/2000 setup software
Specifications
Scanning system | Progressive 1060 lines 24 frames/sec. |
Pixel clock | 40.49 MHz |
Line frequency | 25.43 kHz (1592 pixel clock/line) |
Frame rate for full frame | 24 frames/sec. (1060 lines/frame) |
CCD sensor | 2/3" progressive scan IT CCD with RGB primary color mosaic filter (Bayer) |
Sensing area | 8.9 (h) x 6.6 (v) mm |
Cell size | 6.45 (h) x 6.45 (v) mm |
Effective pixels | 1392 (h) x 1040 (v) |
Pixels in video output, Full | 1380 (h) x 1030 (v) 24 frames /sec. |
Pixels in video output, 1/2 partial | 1380 (h) x 512 (v) 44 frames/sec. |
Pixels in video output, 1/4 partial | 1380 (h) x 256 (v) 70 frames/sec. |
Pixels in video output, 1/8 partial | 1380 (h) x 128 (v) 102 frames/sec |
Sensitivity on sensor | 0.1 Lux (Max. gain, 50% video) |
S/N ratio | >57 dB |
Video A/D conversion | 10 bit |
Video output digital (RGB in Bayer mosaic sequence for external RGB decoding) | 8 bit LVDS (EIA 644); 10 bit in Camera Link |
Video out (analogue for test) | 0.7 Vpp, 75 Ω |
Gamma | 1.0 |
Gain | Manual |
Gain range | -3 to 12 dB |
Synchronization | Int. X-tal. Ext. random trigger |
Sync. output | Composite 4 Vpp from 75 Ω |
Trigger input TTL | 4 V ± 2 V |
EEN output | 4 Vpp from 75 Ω |
Pixel clock output | LVDS or Camera Link |
LEN/FEN output | LVDS or Camera Link |
Trigger input LVDS | LVDS or Camera Link |
Multiple exposure | LVDS or Camera Link |
Trigger modes | Continuous, Edge pre-select, Pulse width control |
Trigger in (Edge pre-select) | >2 H |
Shutter speed (fixed) | 1/24 through 1/10,000 second |
Pulse width control | 2 H to 3 frames. (80 μsec. to 72 msec.) |
Frame-delay readout | Fixed shutter speeds. Delay = 3 frames |
Smearless readout | Edge pre-select, PWC and frame-delay |
Multiple exposure interval | =6 fixed exposures in frame-delay readout. Fixed shutter time 1H (80 μsec.) |
Camera setup by switches on rear | Shutter, Trigger, Scanning, Smearless, RS 232C control |
Functions controlled by RS 232C | Shutter, Trigger, Scanning, Readout, Trigger input, Select/polarity, LEN/FEN/EEN polarity, Set-up level and Gain |
Operating temperature | -5°C to 45°C |
Humidity | 20 - 80% non-condensing |
Storage temp./humidity | -25°C to 60°C/ 20% - 90% |
Power | 12V DC ± 10%. 3.3 W |
Lens mount | C-mount |
Dimensions | 40 x 50 x 90 mm (HxWxD) |
Weight | 250g |