1/3" Monochrome Progressive Scan IT CCD Camera, Gigabit Ethernet Output
JAI Pulnix Industrial-Grade Cameras
JAI Pulnix : RM-6740GE
Description
The JAI RM-6740GE is a high speed camera offering a VGA format monochrome progressive CCD and Gigabit Ethernet output. The Kodak KAI-0340 imager resolution is 640 x 480 pixels at a frame rate of 200 fps in full frame mode, and significantly higher speeds in partial scan and binning modes.
The RM 6740GE is supported by JAI’s easy-to-use SDK and Control Tool software, offering straightforward setup and full GigE Vision and GenICam compliance.
The RM6740GE camera also integrates smoothly with a variety of third-party GigE Vision software libraries and development tools.
Features
→ 1/3" progressive scan IT CCD (Kodak KAI-0340)
→ 640(H) x 480(V) @ 200 fps
→ 7.4 μm square pixels
→ Compact 51 x 51 x 84 mm housing
→ High speed point-to-point connection, up to 1Gbps
→ Gigabit Ethernet output (8-bit/10-bit selectable)
→ Partial scan & binning modes up to 3205 frames per second
→ Maximum dynamic range control through built-in look-up table (8-bit only)
→ Full-frame shutter to 1/64,000 sec.
→ Asynchronous reset, no-delay shutter
→ Built-in pattern generator
→ Extensive software developers kit (SDK)
Specifications
| Sensor | 1/3" progressive scan interline transfer CCD |
| Active area | 4.74mm x 3.55mm |
| Active pixels | 640 (H) x 480 (V) |
| Cell size | 7.4 μm x 7.4 μm |
| Readout modes, A | 640 (H) x 480 (V) @ 200 Hz (full image)* |
| Readout modes, B | 640 (H) x 160 (V) @ 540 Hz (partial scan)* |
| Readout modes, C | 224 (H) x 480 (V) @ 500 Hz (partial scan)* |
| Readout modes, D | 224 (H) x 160 (V) @ 1250 Hz (partial scan)* |
| Synchronization | Internal/External auto switch; HD/VD, 4.0 Vp-p impedance 4.7K Ohm; VD = frame rates ± 2%, non-interlace; HD = 100 kHz/200 kHz ± 2% |
| Pixel clock | 40.00 MHz |
| S/N ratio | >50 dB |
| Sensitivity, Mono | 1.4 lux f=1.4 (no shutter) @ 200 fps, |
| Pixel sensitivity | 30 μV/e- |
| Video output | Gigabit Ethernet, Analog 714 mV 75 Ohm |
| Gamma | Programmable LUT (1.0 std) |
| Lens mount | C-mount (use >1/3" format lenses) |
| Power | 12V DC ± 10%, 440 mA (typical at 25° C) |
| Operating temperature | -10° C to 50° C |
| Vibration | 7 Grms (10 Hz to 2000 Hz) Random |
| Shock | 70 G, 11 ms, half-sine |
| Dimensions | (H x W x L) 51 mm x 51 mm x 84 mm |
| Weight | 194 g (without tripod) |
* Horizontal and vertical 2x and 4x binning independently selectable