(discontinued) Single Channel Video Passive Transceiver
|
|
By: NVT
Video/Power transmission Solutions
|
This item is DISCONTINUED.
A suggested replacement is the NV-214A-M. Or please contact [email protected] for a suitable alternative.
The NVT Single Channel Video Passive Transceiver NV-213A Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The passive NV-213A is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVTs passive products for applications under 750ft (225m). The NV-213A Video Transceiver also incorporates transient protection.
The unparalleled interference rejection and low emissions of the NV-213A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
NV-213A features include:
→ Up to ten NV-213As can be mounted to an NV-RM 8/10 Rackmount Panel
→ Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
→ Up to 3,000ft (1km) with a NVT DigitalEQ hub or active receiver
→ Up to 1,500ft (460m) with a NVT StubEQ hub
→ Mini-coax pigtail supports in-camera mounting in most dome cameras
→ No power required
→ Exceptional interference rejection
→ Frequency Response DC to 10 MHz
→ Built-in transient protection with separate ground connection
→ Supports up-the-coax type control signal up to 750ft (225m)
→ Limited lifetime warranty
Video Frequency response |
DC to 10 MHz |
Video Attenuation |
0.5 dB typ |
Video Common-mode / Differential-mode rejection |
15 KHz to 5 MHz 60 dB type |
Video Impedance Coax, male BNC |
75 ohms |
Video Impedance UTP, Screwless terminal block |
100 ohms |
Power |
No external power required |
Ambient ambient |
-22 to 167 °F (-30 to 75 °C) |
Humidity (non-condensing) |
0 to 95% |
Transient Immunity |
per ANSI / IEEE 587 C62.41 |
Network Wiring |
One Unshielded Twisted Pair 24-16 AWG (0,5-1,31mm) |
Wire Category Type |
2 or better |
Wire Impedance |
100 ± 20 ohms |
Wire DC Loop Resistance |
52 ohms per 1,000ft (18 ohms per 100m) |
Wire Differential Capacitance |
19 pF/ft max (62 pF/m max) |
Dimensions, excluding brackets and connectors |
3.00 x 1.54 x 1.10in (76 x 39 x 28mm) |
Packaged weight |
4.0oz (100g) |
Material |
Black ABS |
Mounting |
Two 0.175in (4,4mm) diameter holes 2.5in (63,5mm) apart |
Product weight |
4.0oz (100g) |
Packaged weight |
4.0oz (100g) |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.