Computer Graphics Video, Stereo Audio & RS-232 Over Twisted Pair Transmitter With EDID
|
|
By: Kramer
Video & Computer Signal Processing Solutions
|
The TP-123EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo analog audio and unidirectional RS-232 control command signals. The TP 123EDID converts the input signals to a twisted pair signal and transmits it over CAT 5 cable to a compatible receiver.
→ Inputs |
1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack |
→ Output |
1 RJ-45 OUT connector |
→ Control |
RS-232 2-pin terminal block |
→ RS-232 Baud Rate |
Up to 19200kbps |
→ Bandwidth (-3dB) |
Audio: 20Hz to 20kHz @0.5dB |
→ Resolution |
Up to WUXGA and 1080p |
→ S/N Ratio |
Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB |
→ Total Gain |
Audio: Analog/analog: 0dB; Analog/SPDIF: �-12dBFS |
→ Coupling |
AC |
→ THD N |
Audio: <0.01% |
→ Power Source |
12V DC, 350mA |
→ Dimensions |
12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H |
→ Weight |
0.3kg (0.67lbs) approx |
→ Accessories |
Power supply |
→ Options |
RK-3T 19" rack mount adapter |
→ System Range |
More than 300ft (more than 100m) |
→ EDID Capture |
Copies and stores the EDID from a display device |
→ Cable |
STP (shielded twisted pair) such as Kramer BC-STP CAT 5 |
→ Power Connect System |
A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other |
→ Compact DigiTOOLS® |
3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.