Sierra Video : SIERRA NLE 88V3DE
Description
Non-linear editing facilities often need to route a variety of signal formats into and out of their editing system. The Sierra NLE 88V3DE multi-level, multi-format routing switcher offers that level of flexibility and much more. Designed specifically for small to mid-sized non-linear editing facilities routing multiple formats, the 8×8 NLE switcher can be configured to include HD-SDI/SDI multi-rate video, SDI-only video, AES/EBU digital audio, analog video and/ or Y/C, RGB/YUV, and analog stereo audio, with optional RS-422 machine control in a separate 1RU frame.
Matrix Mapping Universal Breakaway Switching:
The The Sierra NLE 88V3DE switcher is designed to allow each level of a single input or output to be used independently for various formats. If a The Sierra NLE 88V3 DE switcher is fully configured with all 7 levels installed, a user can connect some combination of up to three video signals (analog video which takes up one level, s-Video (YC) which takes up two levels, component video (YUV) or RGB video, both of which take up three levels) to the video levels of any input. They can also simultaneously connect an SDI video signal, an AES/EBU digital audio signal and either a balanced stereo audio signal or two mono audio signals to the same input. In the The Sierra NLE 88V3DE routing switcher, each level of an input can be switched independently or in conjunction with any combination of the other levels on that input to the corresponding level of any combination of the outputs. That is multi-format, multi-level switching.
Optional Configurations :
Sierra NLE 88VD – 8 x 8 analog video SDI
Sierra NLE 88V2D – 8 x 8 Y/C SDI
Sierra NLE 88V3D – 8 x 8 RGB/YUV SDI
Sierra NLE 88VE – 8 x 8 analog video AES/EBU
Sierra NLE 88V2E – 8 x 8 Y/C AES/EBU
Sierra NLE 88V3E – 8 x 8 RGB/YUV AES/EBU
Sierra NLE 1616VDE – 16 x 16 analog video SDI AES/EBU
Sierra NLE 1616V2DE – 16 x 16 Y/C SDI AES/EBU
Sierra NLE 1616V3DE – 16 x 16 RGB/YUV SDI AES/EBU
Sierra NLE 88VDS – 8 x 8 analog video SDI analog stereo audio
Sierra NLE 88V2DS – 8 x 8 Y/C SDI analog stereo audio
Sierra NLE 88V3DS – 8 x 8 RGB/YUV SDI analog stereo audio
Sierra NLE 1616VDSM – 16 x 16 analog video SDI analog stereo audio RS-422 machine control
Sierra NLE 1616V2DSM – 16 x 16 Y/C SDI analog stereo audio RS-422 machine control
Sierra NLE 1616V3DSM – 16 x 16 RGB/YUV SDI analog stereo audio RS-422 machine control
Features
→ Sierra NLE 88V3DE→ Matrix Mapping Universal Breakaway Switching for multi-format use
→ Adjustable audio gain and attenuation with no zipper effect
→ Room grouping of inputs for flexible configuration in multi room applications
→ Front panel control Interface with LCD display
→ IP and RS-232 control
→ Full range of remote control panels available
→ Analog Video
→ Input
→ Output
→ SDI Video
→ Input
→ Output
→ AES/EBU AUDIO
→ Input
→ Output
→ Analog Audio
→ Input
→ Output
→ RS-422 Machine Control
→ Control
→ General
→ Rack Unit Size/Frame
→ Dimensions
→ Mounts in standard 19” rack
→ Depth measurements do not include front panel hardware or rear cabling
Specifications
| Performance Specifications | |
| Video Gain | Unity |
| Crosstalk | -80dB @ 1MHz, -47dB @ 100MHz, -30dB @ 150MHz |
| Switching | Speed Deterministic |
| Video Level | 0.2V to 5V p-p |
| Impedance | 75 Ohm |
| Return Loss | < -30dB @ 5MHz |
| Connector Type | BNC |
| Video Level | 0.2V to 5V p-p |
| Impedance | 75 Ohm |
| Return Loss | < -30dB @ 5MHz |
| Connector Type | BNC |
| Data Rates | 19 – 360Mbps |
| Data Types | SMPTE 310M, SMPTE 259M, DVB-ASI, ITU-R BT.601 |
| Jitter | < 0.2 UI |
| Video Level | 800mV p-p /-10% |
| Impedance | 75 Ohm |
| Return Loss | > 15dB |
| Cable Equalization Range | 0-300 meters, Belden 8281 |
| Connector Type | BNC |
| Video Level | 800mV p-p /-10% |
| Impedance | 75 Ohm |
| Return Loss | > 15dB |
| Rise/Fall Times | 400 – 1500 psec |
| Connector Type | BNC |
| Data Rates | 32KHz - 96KHz |
| Jitter | <0.025 UI p-p |
| Maximum Distance | 100m |
| Cable | STP |
| Input Type | Balanced |
| Return Loss | 30 dB @ 6 MHz |
| Minimum Input | 200mV p-p |
| Connector Type | Terminal block |
| Output Type | Balanced |
| Audio Level | 3.5V nominal |
| Return Loss | 30 dB @ 6 MHz |
| Connector Type | Terminal block |
| Output Adjust Range | 15dB to -59.5dB and fully off (MUTE) |
| Frequency Response | 20Hz to 20KHz /- 0.5dB (typical -3dB @ 120KHz) (unity gain) |
| Dynamic Range | 96dB (20-20KHz unweighted) (unity gain) |
| Crosstalk | < -80dB @ 1KHz (unity gain), < -60dB @ 10KHz (unity gain) |
| THD | < 0.025% (20Hz – 20KHz @ 4dBu) (unity gain) |
| IM | < 0.025 SMPTE-DIN @ 4dBu (unity gain), <0.01% CCIF @ 16dBu (unity gain) |
| Maximum Source Level | 24dBu |
| Impedance | > 20K |
| Connector Type | 5 pin terminal block for balanced or unbalanced operation |
| Maximum Source Level | 24dBu balanced, 18dBu unbalanced |
| Impedance | < 50 Ohm |
| Connector Type | 5 pin terminal block for balanced or unbalanced operation |
| Connector | one 9 pin female D per port |
| Data Rates | 30Bps - 250Kbps |
| Nominal Data Rate | 8.4Kbps |
| Power Input | 115VAC/60Hz or 230VAC/50-60Hz |
| Power Consumption | 20VAC |
| Size | 1RU (1.75”) h x 10” d |
| Minimum Input | 320mV p-p |
| Jitter | < 0.025 UI p-p |
| Data Rates | 32KHz - 96KHz |
| Serial | General Purpose 9 pin-D, switchable RS-232 or RS-422, 9600, 38400, 115200 baud |
| Serial Protocols | SVS host, simple Kramer, and select others |
| Ethernet | 10/100 Base-T, full duplex, RJ-45 connector |
| Ethernet Protocols | ARP, ICMP, TCP/IP, Telnet, HTTP |
| Web Server | For configuration and control |
| Redundant Control Processor | N/A |
| Control Panels | Supports SCP programmable control panels, XY & single bus control panels |
| 8x8 | 3RU |
| 16x16 | 6RU |
| 8x8 | 19”w x 5.25”h x 19”d |
| 6x16 | 19”w x 10.5”h x 19”d |
| Power | 90 VAC->240 VAC 50/60 HZ (<150 Watts) auto-detecting |
| Storage Temperature | -40 to 150 degrees F |
| Operating Temperature | 30 degrees to 100 degrees F ambient |
| Humidity | 10% to 90 % non-condensing |