Sierra Video : SEQUOIA 128128V
Description
The Sequoia 128128V is made up of 7RU, 8 slot frames that can be populated in a variety of ways, depending upon your needs. For larger systems (up to 512×512) we simply add frames to accommodate the board set required.
Popular Configurations :
Sequoia matrix routing switchers can be configured to any combination of 32 in and 32 out.
Sequoia 3232V — 32 x 32 analog video routing switcher
Sequoia 6464V — 64 x 64 analog video routing switcher
Sequoia 512512V — 512 x 512 analog video routing switcher
Features
→ Sequoia 128128V→ Analog configuration in compact 7RU frame
→ Expand by 32x32 crosspoint modules
→ Host 64x64 analog in one frame
→ Compatibility with Lassen, Sierra Pro XL, Tahoe, Shasta, Yosemite routing switchers
→ RS-232 serial interface uses common 3-port SVS serial protocol
→ Hot-swappable & redundant power supplies
→ Redundant control processors available
→ Wideband Video
→ Input
→ Output
→ Analog Video
→ Input
→ Output
→ Control Ports
→ Control Panel Port (Port 1) RS-485
→ Terminal Port (Port 2) RS-232C (RS-422 optional)
→ Host Port (Port 3) RS-232C
→ Mechanical & Operational Characteristics
→ Control
→ General
→ Rack Unit Size/Frame
→ Dimensions
→ Mounts in standard 19” rack
→ Depth measurements do not include front panel hardware or rear cabling
Specifications
| Performance Specifications | |
| Bandwidth | /-0.2dB to 5MHz, 0dB/-3dB 5MHz to 50MHz |
| Video Gain | Unity ( /-2dB adjustable) |
| Crosstalk | 45dB to 50MHz - adjacent hostile |
| Switching Speed | deterministic |
| Video Level | 1V p-p |
| Impedance | 75 Ohm nominal |
| Return Loss | 40dB @ 5MHz |
| Connector Type | BNC |
| Video Level | 1V p-p nominal |
| Impedance | 75 Ohm nominal |
| Return Loss | 40dB @ 5MHz |
| Connector Type | BNC |
| Video Gain | Unity ( /-2dB adjustable) |
| Crosstalk | >60dB @ 5MHz |
| Switching Speed | deterministic |
| Video Level | 1V p-p |
| Impedance | 75 Ohm nominal |
| Return Loss | 40dB @ 5MHz |
| Connector Type | BNC |
| Video Level | 1V p-p nominal |
| Impedance | 75 Ohm nominal |
| Return Loss | 35dB @ 5MHz |
| Connector Type | BNC |
| Total Number of Panels Supported | Up to 100 |
| Cable Type | 2-wire shielded (Belden 8451 or equivalent |
| Maximum Cable Length | 5,000 ft. (1,500 m) |
| Data Rates | 1.2Kbps, 2.4Kbps, 9.6Kbps, or 19.2Kbps |
| Data Rates | 1.2Kbps, 9.6Kbps, 38.4Kbps, or 115.2Kbps |
| Frame Height | 7 RU (12.25”) |
| Frame Depth | 16” (41 cm) |
| Operating Temperature | Range 0 - 40 degrees C |
| Input Voltage | 115 VAC or 230 VAC /-10% (switch selectable) |
| Power Requirements | 80 - 400 VA per router frame |
| Humidity | 10% to 90 % non-condensing |
| Serial | 2 General Purpose 9 pin-D, each switchable RS-232 or RS-422, 9600, 38400, 115200 baud |
| Serial Protocols | SVS host, simple Kramer, and select others |
| Ethernet | N/A |
| Redundant Control Processor | Optional |
| Control Panels | Supports SCP programmable control panels, XY & single bus control panels |
| Video Frame | 7RU |
| CPU & Protocol Translator Frames | 1RU |
| Video Frame | 19” w x 12.25” h x 19” d |
| CPU & Protocol Translator Frames | 19” w x 1.75” h x 19” d |