Sentech : STC-C43A
Description
The Sentech STCC43A is an industrial grade, CCIR, 2:1 interlace camera, with a 1/3″, monochrome CCD. These cameras are designed and machined with very tight tolerances to have optimal CCD centering quality. This series of camera is extremely reliable, provides a high quality image and is very cost effective.
The STC C43A ultra-compact housing has manual dip switches for on-the-fly adjustments and the camera can be controlled via RS232 software.
Features
STC-C43A features include:
→ 1/3" B/W CCD Image Sensor, 560 TV Lines
→ Cube Camera 1.1" x 1.1" x 1.82"
→ HD / VD Sync. & Field Frame
Specifications
| Image Sensor | 1/3 Interline Monochrome CCIR CCD: ICX409AL |
| Total Picture Element | 795 (H) x 596 (V) |
| Active Picture Element | 752 (H) x 582 (V) |
| Chip Size | 5.59 (H) x 4.68 (V) mm |
| Cell Size | 6.50 (H) x 6.25 (V) µm |
| Scanning System | 2:1 Interlace |
| Vertical Frequency (Frame Rate) | 50.00 Hz |
| Pixel Frequency | 14.1875 MHz |
| Resolution | 560 TV lines |
| S/N Ratio | 56 dB (GAIN 0dB) |
| Minimum Scene Illumination | 0.04 Lux at F1.2, 20 IRE; 0.1 Lux at F1.2, 50 IRE |
| Sync System | Internal / External |
| Video Output | 1.0 Vp-p / 75 Ω, DC coupling |
| Shutter Speed - Dip Switch | OFF; 1/50; 1/100; 1/120; 1/250; 1/500; 1/1,000; 1/2,000; 1/4,000; 1/8,000; 1/10,000; 1/20,000; 1/100,000 second |
| Shutter Speed - Communication | OFF; 1/50 to 1/100,000 second (Variable at every H and clock) |
| Integration | Field / Frame |
| Gain | 0 to 27 dB |
| Gamma | 1/ 0.45 |
| Power - Input Voltage | 12 Vdc /10% |
| Power - Consumption | Less than 1.8 W |
| Communication | RS232 via 12pin connector |
| Dimensions | 28 (X) 28 (H) x 46.3 (D) mm including the lens mount and the connector |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Positional accuracy in H and V directions: /0.31 mm Rotational accuracy of H and V: /2.1 deg. |
| Material - Case | Front, base and rear: Aluminum die cast (ADC12); Cover: Steel sheet covered with zinc |
| Material - Tripod | Polycarbonate ABS |
| Lens Mount | C mount |
| Interface Connector | HR10A-10R-12PB (Hirose) or equivalent |
| Tripod | Tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the other 3 plates) |
| Weight | Approximately 52g (Camera 43g, Tripod: 9g) |
| Temperature and Humidity - Operational | -5 to 50 deg. C |
| Temperature and Humidity - Storage | -30 to 50 deg. C |
| Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
| Shock | Acceleration 70G, half amplitude 6ms, 3 directions 3 times each |
| Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 (Class B) |
| RoHS | RoHS Compliant |
Resources & Documents
| stc-c43a-avs.pdf | Spec Sheet |