SXVGA (1280 x 960), cased, Mini USB 2.0 B/W camera, CS-mount
By: Sentech
Industrial, USB, & Medical Cameras
Sentech : STC-MB133USB
Description
The STC-MB133USB is an ultra-compact, progressive scan, SXGA, USB camera with a 1/3” monochrome CCD. It features 22fps, hardware and software triggering image capture, digital zoom and a feature-rich user based menu setup and control. The STC-MB133USB is a cased model available with a rear mini-USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.
Features
STC-MB133USB features include:
→ 1/3" CCD Image Sensor, SXVGA (1.25 MP)
→ Ultra-Compact Size
→ Hardware & Software Trigger
Specifications
| Image Sensor | 1/3 Interline SXVGA monochrome progressive CCD: ICX445AL (Sony) |
| Total Picture Element | 1348 (H) x 976 (V) |
| Effective Picture Element | 1296 (H) x 966 (V) |
| Chip Size | 6.26 (H) x 5.01 (V) mm |
| Cell Size | 3.75 (H) x 3.75 (V) µm |
| Scanning System | Progressive |
| Resolution | 1280 (H) x 960 (V) (Full scanning) 1280 (H) x 440 (V) (1/2 partial scanning) 1280 (H) x 168 (V) (1/4 partial scanning) |
| Scanning Methods | Full scanning, 1/1 partial scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning, Binning scanning, Binning 1/1 partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning |
| Maximum Frame Rate - Full Scanning | 22.40 fps (Normal) / 11.20 fps (1/2 clock) / 5.60 fps (1/4 clock) |
| Maximum Frame Rate - 1/2 Partial Scanning | 44.81 fps (Normal) / 22.40 fps (1/2 clock) / 11.20 fps (1/4 clock) |
| Maximum Frame Rate - 1/4 Partial Scanning | 89.80 fps (Normal) / 44.90 fps (1/2 clock) / 22.45 fps (1/4 clock) |
| Pixel Frequency | 36.818 MHz (Normal) / 18.409 MHz (1/2 clock) / 9.20453 MHz (1/4 clock) |
| Video Output | 8bit / 10bit / 12bit |
| Minimum Scene Illumination | 0.15 Lux at F1.2 |
| Sync System | Internal |
| Electronic Shutter | Auto / Manual (software selectable) |
| Normal | 1/36,818,182 to 1/22.40 seconds |
| 1/2 Clock | 1/18,409,091 to 1/11.20 seconds |
| 1/4 Clock | 1/9,204,545 to 1/5.60 seconds |
| Gain | Auto / Manual (software selectable) |
| Gamma | Manual (software selectable) |
| White Balance | Auto / Manual / One shot (software selectable) |
| Trigger Mode | Free-run / Edge preset trigger / Pulse width trigger / Start & stop trigger (software selectable) |
| Input / Output | USB 2.0 High Speed |
| Power - Input Voltage | 5 Vdc through USB connector ( 4.4 to 5.25V) |
| Power - Consumption | < 300 mA |
| Dimensions | 28 (W) x 28 (H) x 37 (D) mm (excluding connector) |
| Lens Mount | CS mount |
| Weight | Approximately 45g |
| Interface Connector | USB: mini-B USB connector IO signal: 6pin connector (HR10A-7R-6PB or equivalent) |
| Temperature - Operational | 0 ~ 40 deg. C |
| Temperature - Storage | -30 ~ 65 deg. C |
| Vibration | 20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each |
| Shock | Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each |
| Standard Compliancy | EMS: En61000-6-2, EMI: EN61000-6-3 (Class B) |
| RoHS | RoHS Compliant |