2MP High Speed CMOS 340fps, Camera Link Camera – Monochrome
By: Sentech
Industrial, USB, & Medical Cameras
Sentech : STC-CMB2MCL
Description
The Sentech STCCMB2MCL is part of the high-speed, CMOS Camera Link Camera series. This monochrome camera uses the C-MOSIS 2 Megapixel sensor which outputs full resolution at 340 fps.
The STC CMB2MCL also provides full triggering capabilities, a configurable AOI (Area of Interest) and comes in a small package of 50 (W) x 50 (H) x 40.5 (D) mm.
Features
STC-CMB2MCL features include:
→ High Performance Machine Vision Camera w/ Full Triggering
→ 2/3" CMOS Sensor, High Speed Data Rate
→ Fully Configurable AOI (Area of Interest)
Specifications
| Imager | 2/3" 2 Megapixel monochrome CMOS (CMOSIS: CMV2000) |
| Active Picture Element | 2048 (H) x 1088 (V) |
| Chip Size | 11.264 (H) x 5.984 (V) mm |
| Cell Size | 5.5 (H) x 5.5 (V) μm |
| Scanning System | Progressive |
| Scanning Method | Full scanning, Variable partial scanning, Binning scanning, Binning variable partial scanning |
| Vertical Frequency (Frame Rate) | 8-bit 10TAP: 340 Hz / 10-bit MEDIUM: 150 Hz (8-bit FULL / 8-bit MEDIUM / 8-bit BASE / 10-bit BASE is selectable via communication) |
| Horizontal Frequency | 8-bit 10TAP: 372 kHz / 10-bit MEDIUM: 164 kHz |
| Pixel Frequency | 8-bit 10TAP: 48 MHz / 10-bit MEDIUM: 21.25 MHz |
| Noise Level | ≤ 3 Digit (Gain 0 dB) |
| Sync System | Internal |
| @ 8Bit Output | 10TAP / FULL / MEDIUM / BASE configuration |
| @ 10Bit Output | MEDIUM / BASE configuration |
| Shutter Speed | OFF, 45 seconds to 1/372,093 seconds (Variable at line) |
| Gain | 1x to 4x |
| Gamma | 1.0 |
| Input Voltage | 12 Vdc ± 10% |
| Consumption | Less than 4.5 W |
| Trigger Mode | Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset) |
| Communication | RS232 via Camera Link connector |
| Dimensions | 50 (W) x 50 (H) x 40.5 (D) mm (Excluding the connector) |
| Optical Filter | No IR cut filter |
| Material | Aluminum (AC) |
| Lens Mount | C mount |
| Interface Connector | Camera Link connector: SDR connector x 2; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent |
| Weight | Approximately 140 g |
| Operating Temperature | -5 to 40 deg. C |
| Storage Temperature | -30 to 65 deg. C |
| Vibration | 20 Hz to 200 Hz to 20 Hz (5 min. cycle), acceleration 10G, 3 directions 30 min. each |
| Shock | Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each |
| Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 (Class B) |
| RoHS | RoHS Compliant |