USB 2.0, color, cased camera, rear connector, CS-mount, w/ IR cut filter
Industrial, USB, & Medical Cameras
Sentech : STC-TC133USB-A
Description
The STC-TC133USB-A is a compact USB SXVGA progressive scan camera with color CCD 1/3 “. Has 22fps, shutter hardware and software, image capture, digital zoom and a configuration menu and user control complete. STC-TC133USB-A is a model case with top or rear USB connector. Sentech USB cameras include an SDK, DirectX, Twain and Linux drivers and visualization software Sentech.
Also Available: STC-TC133USB-AS, STC-TC133USB-AS-NF STC-TC133USB-AT,STC-TC133USB-AT-NF
Features
STC-TC133USB-A features include:
|
|
|
Specifications
|
Model No. |
STC-TC133USB-A |
|
Imaging |
1/3 "Interline CCD Progressive SXVGA Color: ICX445AQ |
|
Total Imaging Element |
1348 (H) x 976 (V) |
|
Active image element |
1296 (H) x 966 (V) |
|
Chip size |
6.26 (H) x 5.01 (V) mm |
|
Cell Size |
3.75 (H) x 3.75 (V) um |
|
Scanning System |
Progressive |
|
Examination Methods |
Scanning full, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning Scanning Variable Partial |
|
Frequency of pixels |
36.818 MHz (Normal) / 18.4090 MHz (half clock) / 9.20453 MHz (1/4 clock) |
|
Frames per second maximum |
- |
|
- Full Scan |
22.40 fps (Normal) / 11.20 fps (half clock) / 5,600 fps (1/4 clock) |
|
- 1/2 Part |
44.81 fps (Normal) / 22.40 fps (half clock) / 11.20 fps (1/4 clock) |
|
- 1/4 Part |
89.80 fps (Normal) / 44.90 fps (half clock) / 22.45 fps (1/4 clock) |
|
Resolution |
1280 (H) x 960 (V) (Full Scanning) 1280 (H) x 440 (V) (1/2 Partial Scanning) 1280 (H) x 168 (V) (1/4 Partial Scanning) |
|
Minimum scene illumination |
3.23 Lux at F1.2 |
|
System Synchronization |
Internal |
|
Electronic Shutter |
Auto / Manual (Software Selectable) |
|
- Normal |
1/36, 818.182 seconds to 1/22.40 |
|
- 1/2 Clock |
1/18, 409.091 seconds to 1/11.20 |
|
- 1/4 Clock |
Ninth, 204.545 seconds to 1/5.60 |
|
Increase |
Auto / Manual (Software Selectable) |
|
Gamma |
Manual (Software Selectable) |
|
White balance |
Auto / Manual / One shot (Software Selectable) |
|
Trigger mode |
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (software selectable) |
|
Input / Output |
USB 2.0 High Speed |
|
Energy |
- |
|
- Input Voltage |
+5 Vdc through USB connector / DC Jack |
|
- Consumption |
Less than 500 mA |
|
Dimensions |
- |
|
- Model AS |
51 (W) x 51 (H) x 43.3 (D) mm |
|
- Model AT |
51 (W) x 51 (H) x 40.6 (D) mm |
|
Mount type |
CS Mount |
|
Tripod |
Two screws on the bottom plate |
|
Weight |
Approximately 145g |
|
Temperature |
|
|
- Operational |
0 to 40 deg. C |
|
- Storage |
-30 To 65 deg. C |
|
Vibration |
20 Hz to 200 Hz to 20 Hz (5 min. / Cycle), acceleration 10G, 3 directions 30 min. each |
|
Shock |
Acceleration 70G, half amplitude 6 ms 3 directions 3 times each |
|
Regulatory Compliance |
EMS: EN61000-6-2, EMI: EN61000-6-3 (Class B) |
|
Compliant |
RoHS Compliant |