Sentech : STC-TB133USB-ASH
Description
The STCTB133USBASH is a compact, progressive scan, SXVGA, USB camera with a 1/3 monochrome CCD. It features 22fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control.
The STC TB133USB ASH is a cased model available with a rear mini-USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.
Features
→ 1/3" CCD Image Sensor, SXVGA (1.25 MP)→ Signal Output over 12pin Connector, 22fps
→ Hardware & Software Trigger
Specifications
| Imager | 1/3” Interline SXVGA Monochrome Progressive CCD: ICX445AL |
| Total Picture Element | 1348 (H) x 976 (V) |
| Active Picture Element | 1296 (H) x 966 (V) |
| Chip Size | 6.26 (H) x 5.01 (V) mm |
| Cell Size | 3.75 (H) x 3.75 (V) µm |
| Scanning System | Progressive |
| Scanning Methods | Full Scanning, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning, Binning Variable Partial Scanning |
| Pixel Frequency | 36.818 MHz (Normal) / 18.4090 MHz (1/2 clock) / 9.20453 MHz (1/4 clock) |
| Maximum Frame Rate - Full Scanning | 22.40 fps (Normal) / 11.20 fps (1/2 clock) / 5.600 fps (1/4 clock) |
| Maximum Frame Rate - 1/2 Partial | 44.81 fps (Normal) / 22.40 fps (1/2 clock) / 11.20 fps (1/4 clock) |
| Maximum Frame Rate - 1/4 Partial | 89.80 fps (Normal) / 44.90 fps (1/2 clock) / 22.45 fps (1/4 clock) |
| Resolution | 1280 (H) x 960 (V) (Full Scanning) 1280 (H) x 440 (V) (1/2 Partial Scanning) 1280 (H) x 168 (V) (1/4 Partial Scanning) |
| S/N Ratio | ≤ 10 digit (Factory Default Gain Setting) |
| Minimum Scene Illumination | 0.18 Lux at F1.2 |
| Sync System | Internal |
| Electronic Shutter | Auto / Manual (Software Selectable) |
| Normal | 1/36,818,182 to 1/22.40 seconds |
| 1/2 Clock | 1/18,409,091 to 1/11.20 seconds |
| 1/4 Clock | 1/9,204,545 to 1/5.60 seconds |
| Gain | Auto / Manual (Software Selectable) |
| Gamma | Manual (Software Selectable) |
| White Balance | Auto / Manual / One shot (Software Selectable) |
| Trigger Mode | Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable) |
| Input / Output | USB2.0 High Speed |
| Power - Input Voltage | 5 Vdc through USB connector or 12Pin connector |
| Power - Consumption | Less than 430 mA |
| Dimensions | 50 (W) x 50 (H) x 35.8 (D) mm |
| Lens Mount | CS Mount |
| Input / Output Connector | 12 Pin Connector (Hirose) / 2.5 mm Pin Jack |
| Tripod | 1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top, bottom and both side of case |
| Weight | Approximately 112g |
| Operating Temperature | 0 to 40 deg. C |
| Storage Temperature | -30 to 65 deg. C |
| Vibration | 20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each |
| Shock | Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each |
| Standard Compliancy | EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B) |
| RoHS | RoHS Compliant |