1/3" Interline Progressive CCD Square/Cube Type Color Camera
By: Sentech
Industrial, USB, & Medical Cameras
Sentech : STC-RCLC33A-C3
Description
The Sentech STCRCLC33AC3 is a full featured, cube remote head, cost effective, VGA, progressive scan, digital Camera Linkｮ cube camera with a 1/3″ color CCD.
STC RCLC33A C3 features a full frame, 90fps, VGA output, partial scanning, triggering, and reset capabilities.
Features
→ 1/3" CCD Image Sensor→ VGA, Progressive Scan, 90fps
→ Cube Remote Head Type
Specifications
| Imager | 1/3” Interline VGA Color Progressive CCD: ICX424AQ |
| Total Picture Element | 692 (H) x 504 (V) |
| Active Picture Element | 648 (H) x 494 (V) |
| Chip Size | 7.4 (H) x 7.4 (V) mm |
| Cell Size | 5.79 (H) x 4.89 (V) μm |
| Scanning System | Progressive |
| Scanning Method | Full, Partial full, 1/2 partial, 1/4 partial, Variable partial |
| Vertical Frequency (Frame Rate) | 31.47 (30 fps) / 62.94 (60 fps) / 94.784 (90 fps) Hz |
| Horizontal Frequency | 15.7343 (30 fps) / 31.4685 (60 fps) / 47.2028 (90 fps) kHz |
| Pixel Frequency | 12.2727 (30 ps) / 24.5454 (60 fps) / 36.8181 (90 fps) MHz |
| S/N Ratio - @ 8bit output | ≤ 3 Digit (Gain 0 dB) |
| S/N Ratio - @ 10bit output | ≤ 10 Digit (Gain 0 dB) |
| Minimum Scene Illumination | 0.04 Lux @ F1.2, 20 IRE; 0.13 Lux @ F1.2, 50 IRE |
| Sync System | Internal / External (HD/VD) |
| Video Output | Digital 8 or10 bit CameraLink® (Base Configuration) |
| Tap | 1 Tap |
| Shutter Speed | OFF, 1/3 ~ 1/40,000 (30 fps); 1/7 ~ 1/80,000 (60 fps); 1/11 ~ 1/120,000 (90 fps), (Variable at every H and clock) |
| Gain | Adjustable Fixed Gain (0 ~ 27 dB) |
| Gamma | 1.0 |
| Trigger Mode | Edge preset trigger (V-reset, Non-reset) Pulse width trigger (V-reset, Non-reset) |
| Communication | RS232 via CameraLink® connector |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Position accuracy of H and V direction: /0.31mm; Rotational accuracy of Hand V: /2.1 deg. |
| Material | Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc |
| Lens Mount | C Mount |
| Power I/O Connector | N/A |
| Vibration | 10G (20 to 200 Hz) |
| Shock | 70G (3 directions, 3 times each) |
| Power - Input Voltage | 12 Vdc ± 10% |
| Power - Consumption | < 1.8 W, 150 mA |
| Temperature and Humidity - Operational | -5 ~ 50 deg. (23°F ~ 122°F) |
| Temperature and Humidity - Storage | -30 ~ 65 deg. (-22°F ~ 140°F) |
| Dimensions | 28(W) x 28(H) x 29.5(D) mm (1.1” x 1.1” x 1.16”) (Not including lens mount or the connector) |
| Weight | 43g (1.51 oz.) |