Sony : XCL-C130
Description
Sony has made it easier than ever for customers to migrate from analog to digital with the introduction of the new monochrome PoCL camera, the XCLC130. Featuring SXGA resolution of 1,296 x 966 effective pixels, this camera offers exciting new options for a wide array of applications, including Intelligent Transportation Systems, machine vision and sports shooting.
The XCL C130 camera is equipped with several unique features, including Shading Correction, Defect Correction and Temperature Readout.
Specifications
| Image sensor | 1/3-type progressive scan IT CCD |
| Image sensor (Number of effective pixels, H x V) | 1,296 x 966 |
| Cell size (H x V) | 3.75 μm x 3.75 μm |
| Output pixels (H x V) | 1,280 x 960 |
| Output pixels (H x V, Full resolution) | 1,296 x 966 |
| Color filter | – |
| Frame rate | 31 fps |
| Minimum illumination (50%) | 0.5 lx (Iris: F1.4, Gain: 18 dB, Shutter: 1/30 s) |
| Sensitivity | F5.6 (400 lx, Gain: 0 dB) |
| S/N ratio | More than 50 dB |
| Gain | Auto, Manual: 0 dB to 18 dB |
| Shutter speed | 2 s to 1/100,000 s |
| White balance | – |
| Readout modes | Normal, Binning (2 x 1, 1 x 2, 2 x 2), Partial scan |
| Readout features | Binnarization, Gamma (variable), Built-in test pattern, LUT |
| Synchronization | Hardware trigger, Software trigger |
| Trigger modes | Edge detection, Pulse width detection, Bulk Trigger, Sequential Trigger |
| Memory channel (Usersets) | 16 channels |
| User memory | 32 kbytes 64 bytes x 16ch |
| Other features | Shading correction, Defect correction, Temperature readout |
| Video data output | 8, 10, 12-bit, digital |
| Digital interface | LVDS |
| Camera specification | PoCL, CameraLink® Version1.2 |
| Output data clock | 50 MHz (1 tap), 25 MHz (2 tap) |
| Digital input/output | TTL IN (x3), TTL OUT (x3) |
| Lens mount | C mount |
| Power requirements | DC 12 V ( 10.5 V to 15.0 V) |
| Power consumption | 2.4 W (typical) |
| Operating temperature | 23°F to 113°F (-5°C to 45°C) |
| Performance guarantee temperature | 32°F to 104°F (0°C to 40°C) |
| Storage temperature | -22°F to 140°F (-30°C to 60°C) |
| Operating humidity | 20% to 80% (no condensation) |
| Storage humidity | 20% to 95% (no condensation) |
| Vibration resistance | 10 G (20 Hz to 200 Hz) |
| Shock resistance | 70 G |
| Dimensions (W x H x D) | 1 3/16 x 1 3/16 x 1 3/16 inches (29 x 29 x 30 mm) (excluding protrusions) |
| Weight | 2.0 oz (56 g) |
| Regulations | UL60950-1, FCC Class A, CSA C22.2-No.1, IC Class A Digital Device, CE: EN61326 (Class A), AS EMC: EN61326, VCCI Class A, KCC |
| Supplied accessories | Lens mount cap (1), Operating instructions (1) |
| Shading Correction | Minimizes uneven image intensity caused by lighting conditions. |
| Defect Correction | Automatically minimizes defective pixels directly inside the camera. |
| Temperature readout | Eliminates the need for a separate sensor and simplifies system configuration. |
| Memory Channel | Up to 16 sets of camera parameters can be stored in addition to the factory default settings. |
| Bulk Trigger Modes | Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger. |
| Sequential Trigger Mode | Allows the camera to capture a single image using successive setups stored in the memory channel. |