Indoor Day/Night Dinion IP Pre-packaged Camera
|
|
By: Bosch
Extreme CCTV Telex RTX Cameras DVRs & Monitors
|
The Bosch KBN-498V28-20 Indoor Day/Night Dinioin IP Pre-packaged Camera is a complete survelliance system with a 1/3" high resolution imager and a 2.8-11mm lens, provides high-quality imagery at a resolution up to 540TVL. The camera is pre-wired into a housing that has a feed-through wall mount. It features a 20-bit digital signal processing that improves the sensitivity and the 2x dynamic technology provides detailed images.
Available Configurations Include:
KBN-498V28-20NV |
IP INDOOR PREPACKAGED, HIGH RESOLUTION COLOR CAMERA, 2.8-11MM LENS, 24VAC 60HZ, IVA-PREPARED |
KBN-498V28-20 features include:
- 1/3" CCD image sensor with 2.8-11mm varifocal lens
- Resolution - up to 540TVL
- 20-bit image processing - captures detailed images in both bright highlights and deep shadows simultaneously; image processing and wide dynamic range function when used together maximizes the information visibility in the image even with strong backlighting
- 2x-Dynamic and SmartBLC - pixel-by-pixel analysis to provide detailed image and SmartBLC compensates the image without compromising the dynamic range or any additional set-up
- Automatic auto black feature - increases the visibility of details in mist or fog conditions where the scene contrast is less than full range
- Bilinx technology - enables you to change the camera settings, check status, and update firmware from anywhere via the coaxial cable; uses the standard video cable to transmit alarm and status messages, improving the overall performance of the camera and reducing the service/installation time
- Auto white balance - adjusts the red and blue signals in the MWB mode by taking a standard white color reference to get the most natural colors
- Privacy masking - provides 4 different privacy zones, enabling you to mask specific portion of a scene for security
- Default shutter speed - allows you to capture fast moving objects when sufficient light is available
- Multi-language on-screen display for easy access and also increases user compatibility
- Programmable modes - supports up to 6 independent, pre-programmed operating modes which can be easily switched via Bilinx or the external alarm input
- Built-in video motion detection - enables you to select a programmable area with individual threshold; on motion detection, the alarms can be displayed in video signals or an alarm message can be sent via Bilinx
- SensUp dynamic - improves the sensitivity by increasing the integration time up to 10 times on the CCD, useful when relying only on moonlight for illumination
- Plug-and-play feature allows you to install the camera easily
Video Connector |
Prewired 5' (1.5 m) coax with female BNC connector |
Power Connector |
0.03" (1 mm) (18 AWG), 3 conductor, 5' (1 m) wiring harness with flying leads (Brown/Blue-24 V, Green-Ground) |
Power Requirements |
21 to 28 VAC, 60 Hz |
Power Consumption |
45 W |
Construction |
Material: Aluminum housing casing, neoprene gaskets, UV-resistant polymer end caps, and all stainless steel hardware
Finish: Gray
Window: 0.12" (3 mm) Thick UV-stabilized polycarbonate
Mounting: Four 5/16" (8 mm) diameter fasteners (not included) are required for mounting |
Operating Temperature |
-4 ~ 122°F (-20 ~ 50°C) |
Humidity |
20 to 93% RH |
Rating |
IP66, NEMA-4X |
Dimensions (WxHxD) |
6.7 x 5 x 18.9" (171 x 127 x 480 mm) |
Weight |
6.3 lbs (2.9kg) |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.