
Ikegami : IPD-BX11
Description
The Ikegami IPD-BX11 combines the benefits of an IP network camera with our Hyper Wide Dynamic technology. The resulting sub-megapixel camera captures more useful information from a given scene than megapixel cameras with much greater bandwidth requirements. IP network cameras produce images previously unimaginable with analog cameras, and allow for modern low-voltage integration at an unprecedented level.
Also Available: IPD-BX11_KIT_27135, IPD-BX11_KIT_5550, IPD-BX11_KIT_27135_ACDC
Unit with Housing: KIT-BX11-OD, KIT-BX11OD2
Features
IPD-BX11 features include:
→ More Usable Pixels
→ High-quality Picture
→ Scene File Function and Field Setup
→ IP Network Camera
Specifications
Image Sensor | 1/3" DPS CMOS |
Effective Pixels | Approximately 410,000 pixels Effective (H x V) : 758 x 540 |
Scaning System | NTSC : 525 TVL at 59.94 Hz, 2:1 interlace PAL : 625 TVL at 50 Hz, 2:1 interlace |
Synchronization System | Internal crystal lock |
Analog Video Output | VBS 1.0 Vpp / 75 Ω (for adjusting angle of view) Horizontal resolution 520 TVL or better |
S/N Ratio | 50 dB or better (pp / rms) |
Minimum Illumination | In Color Mode: 0.22 lux / F1.2 [50 IRE] (Electronic sensitivity up Off) In Color Mode: 0.007 lux / F1.2 [50 IRE] (Electronic sensitivity up On 32 x) In Monochrome Mode: 0.022 lux / F1.2 [25 IRE] (Electronic sensitivity up Off) In Monochrome Mode: 0.0007 lux / F1.2 [25 IRE] (Electronic sensitivity up On 32x) |
Wide Dynamic Range | Built-in and variable |
AGC (Automatic Gain Control) | On (AGC / hyper-AGC) / Off (Low / mid / high) selectable |
Electronic Sensitivity UP | Built-in, On / Off selectable (Up to 32 times) |
Day/Night Operation | Built-in, true day / night, auto / manual selectable |
Digital Zoom | Built-in (Up to 4 times) |
Auto Iris | DC Iris |
Detail Correction | Built-in |
White Balance | ATW / ATWex / AWC / MANU selectable |
Color Rolling Reduction | Built-in, On / Off selectable (CRR Function) |
Privacy Masking | Built-in (Maximum 8 zones) |
Digital Noise Reduction (DNR) | Built-in, On / Off selectable (DNR function) |
Monitor Output Selection | CRT / LCD selectable |
Camera ID | Up to 24 characters (Alphanumeric and symbols) |
Lens Mount | CS |
Flangeback Adjustment Mechanism | Built-in |
Codec | H.264 / M-JPEG selectable |
Image Size | NTSC : 720 x 480, 720 x 240, 352 x 480, 352 x 240 PAL : 720 x 576, 720 x 288, 352 x 576, 352 x 288 |
Frame Rate | NTSC : Up to 30 fps PAL : Up to 25 fps |
Bit Rate | H.264: 64 Kb/s to 8 Mb/s |
Image Quality | M-JPEG: 5 steps |
Transmission | Mode: VBR / CBR |
Network | Ethernet 10 Base-T / 100 Base-TX |
Protocol | TCP, UDP, RTP / RTCP, RTSP, HTTP, FTP, NTP, ONVIF support (Multicast delivery available) |
Monitoring | Viewer or NVR |
Focus EZ | Built-in |
Power Requirement | 12 DC (10.5 to 15 V) PoE (IEEE 802.3af) Class 0 |
Power Consumption | 4 W approximately |
Input / Output Connectors | LAN: RJ-45 (Auto - MDI / MDIX) 12 VDC Input: 2P Service Monitor Out: BNC Lens: 4P (E4-191J-150 or equivalent) |
Operating Humidity | 30 to 90% RH (Non-condensing) |
Operating Temperature | 14 to 122°F (-10 to +50°C) |
Dimensions (W x H x D) | 2.36 x 2.28 x 2.76" (60 x 58 x 70 mm) |
Weight | 0.66 lb (0.3 kg) |
Resources & Documents
ipd-bx11.pdf | Datasheet |