JVC : DT-F9L5U
Description
This item is DISCONTINUED.
The JVC DT-F9L5U 8.2″ Broadcast Studio Monitor features a 16:10 widescreen active matrix TFT LCD with a gloss surface and an LED backlight. The resolution is 1280 x 800, contrast ratio 800:1, and brightness 450 nit. The viewing angle is 80 up, down, left, right. An Anton Bauer battery plate is included for portable power and you can optionally also get JVC’s ADPV16 AC adapter.
Features
DT-F9L5U features include:
- 8.2" IPS panel with 1280 x 800 resolution
- Mercury-free white LED backlight
- 800:1 contrast ratio
- 450 nit brightness
- 160 x 160° viewing angle
- 16 channel SDI audio level metering
- Area/Center/Aspect marker
- SDI timecode display
- Front and rear tally lamps
- Anton Bauer battery plate
- Two 3G/HD/SD-SDI inputs and one switched out output
- Bridge-connected Composite BNC input and output
- HDMI input
- Component input on 3x BNCs
- RCA audio input on one connector
- RCA L/R audio output
- Front panel headphone jack
- RJ-45 Make/Trigger
- D-Sub9 RS-232C
- Waveform
- Vectorscope
- Underscan / Overscan
- Peaking Focus Assist
- False Color
- Blue Gun
- Zebra
Specifications
| Screen | 8.2" wide, active matrix TFT LCD (21 cm) LED backlight ADS type panel, gloss surface |
| Effective Screen Size | W x H x D: 7 x 4.3 x 4.2 (18 x 11 x 21 cm) |
| Resolution | 1280 x 800 |
| Colors | 16.7 million |
| Viewing Angle | 160° / 160° |
| Brightness | 450 nit |
| Contrast Ratio | 800:1 |
| Aspect Ratio | 16:10 |
| Input & Output | 3G/HD/SD-SDI input (embedded audio supported) 2x auto detecting BNC connectors HD-SDI output switched out (embedded audio supported) 1x auto detecting BNC connector HDMI input: 1x HDMI, HDCP-compatible Composite input/output: 1x line on 2x BNC connectors, 1 V (p-p), 75 Ω The input and output terminals are bridge-connected (auto termination) Component input: 1x line on 3x BNC connectors Y: 1 V(p-p), 75 Ω(with sync) PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω RCA audio input: 1x RCA connector, 500 mV (rms), high impedance RCA audio output: 2x RCA connectors, 500 mV (rms) 500 mV (rms) 1x headphone jack Remote (Make/Trigger): 1x RJ-45, contact or momentary pulse to corresponding terminal Remote (RS-232C): D-Sub9, serial communication |
| Format | HD-SDI: SMPTE292M SD-SDI: ITU-R BT.656, SMPTE259M Embedded Audio 16 Ch: SMPTE299M, SMPTE272M |
| Timecode | SDI timecode |
| Audio Metering | Digital (up to 16 ch) |
| Power Requirements | AC 120 V / AC 220 - 240 V, 50/60 Hz or DC 12 - 17 V Power input: 4-pin XLR Optional power adapter: model # ADPV16 |
| Rated Current | 0.5 A (AC 120 V) 0.25 A (AC 220 - 240 V) 1.3 A (DC 12 - 17 V) |
| Operating Temperature | 41 to 95°F (5 to 35°C) |
| Operating Humidity | 20 - 80% (non-condensing) *Slightly variable depending on ambient conditions for installation |
| Dimensions | 8.6 x 8.6 x 7.5" (22 x 22 x 19 cm) |
| Weight | 7 lb (3.2 kg) |