JAI : EL-2800M-PMCL
Description
This product has been discontinued. For a replacement, please contact sales.
The JAI EL-2800M-PMCL (momochrome) and EL-2800C-PMCL (color) are the first models in JAI’s Elite Series, a new family of high performance industrial cameras designed for applications where image fidelity is paramount.
These new 2.8 megapixels cameras utilize advanced Sony technology (ICX674 2/3″ progressive scan) featuring EXview HAD CCD II technology.
The EL-2800M-PMCL cameras deliver excellent sensitivity, improved NIR response, reduced smear, higher quantum efficiency and large image uniformity while minimizing shutter leakage and readout noise for an overall supreme image quality.
The cameras can run as high as 54.7 frames/s at full resolution (1920 x 1440 pixels) and at 60 frames/s in HD-mode – 1080 P60 (1080 x 1920 pixels).
Featuring Automatic Level Control (ALC), P-iris control and a programmable 3-axis motorized control capability, the cameras are well suited in outdoor applications with changing lighting conditions such as in traffic imaging, high-end surveillance and sports imaging.
The cameras are also suitable for semiconductor inspection, microscopy, and ophthalmology other areas where high dynamic range, maximum image quality and high light sensitivity are key requirements.
In addition to raw Bayer output, the color model (EL-2800C-PMCL) can perform in-camera color 24-bit RGB interpolation at 15.8 fps.
The monochrome model (EL-2800M-PMCL) offers excellent NIR sensitivity and supports 1 x 2, 2 x 1, or 2 x 2 binning modes for even greater sensitivity.
Both monochrome and color models feature fixed or variable partial scanning modes for increased frame rates, multiple trigger modes, a 256-point look-up table, and more.
Dual Mini Camera Link connectors support Base or Medium configurations to achieve maximum frame rates depending on the bit depth of the output.
Features
→ Elite Series
→ 2/3" progressive scan CCD with 2.8-megapixel resolution (1920 x 1440)
→ 54.7 fps at full resolution (60 fps in HD mode)
→ 4.54 µm square pixels with 4:3 aspect ratio
→ Latest Sony ExView HAD CCD ll technology for increased sensitivity and NIR response in monochrome model
→ Variable partial scanning for increased frame rates
→ Vertical and horizontal binning on monochrome model for even higher sensitivity
→ Flat-field and pixel blemish correction
→ 8/10/12-bit Mini Camera Link output
→ C-mount lens mount
→ Accepts power over Mini Camera Link or via 12-pin connector
→ Automatic Level Control (ALC) for dynamic lighting conditions
→ Built-in P-iris lens control, as well as programmable 3-axis control for motorized lenses, pan/tilt heads, and other analog accessories
Specifications
| Sensor | 2/3" progressive scan CCD(ICX674) |
| Pixel Clock | 54MHz |
| Frame rate, fullframe | 54.7 frames/sec. |
| Active area | 8.72mm(h) x6.54mm(v), 10.97 mm diag. |
| Cell size | 4.54 µm(h) x4.54 µm(v) |
| Active pixels | 1920 (h) x 1440 (v) |
| Horizontal outputfrequency | 40.693kHz (1X2-2YE, 1X2-1Y binning off) |
| Read-outmodes | Full: 1920 (h) x 1440 (v) 54.7 fps Programmable partial scan: Startline from0 to 1430, heightfrom8 to 1440 lines Binning: (1L stepsmono, 2L steps color) 24.574 µs perline 1x2, 2x1, 2x2 (monochrome only) |
| EMVA 1288 parameters | 12-bit outputformat: |
| Absolute sensitivity (color) | 15.94p (λ=525 nm) |
| Absolute sensitivity (mono) | TBD |
| Maximum SNR (mono) | 41.39dB |
| Maximum SNR (color) | TBD |
| Traditional SNR | mono: >61 dB. (0 dB gain) color: >58.5 dB. (0 dB gain, green) |
| Video signal output | mono: 8/10/12-bitmonochrome color: 8/10/12-bitrawBayer, or 24-bit RGB interpolated |
| Auto-iris lens video output | 0.7Vp-p,with 0.3Vhoriz. sync |
| Gain | Monochrome: Manual/automatic -3 dB to 24 dB Color: Manual/automatic 0 dB to 24 dB |
| White balance (EL-2800C) | Manual, one-push auto, or continuous (3000Kto 9000K) |
| Gamma | 0.45-1.0 (16 steps) or 256-point LUT |
| Synchronization | Internal |
| Trigger input | GPIOselectable - SW, pulse gen, ext.HW (TTL/CL) |
| Trigger modes | EPS, PIV, Trigger Width, RCT (with ALC), Sequence Trigger |
| Electronic shutter | Timed exposure: 10 µs to 8 sec in 1 µs steps Auto shutter: 1/54 to 1/100,000 sec. |
| Auto level control(ALC) | Flat field correction, color shading correction (EL-2800C), blemish compensation (512 pixels) |
| Lens control | P-irisor programmable control ofmotorized lenses, pan/tilt heads, and other analog accessories |
| Operating temperature | -45° Cto 70° C |
| Storage temperature | -45° Cto 70° C |
| Humidity | 20 - 80% non-condensing |
| Vibration | 10G(20Hz to 200HzXYZ) |
| Shock | 80G |
| Regulations | CE (EN61000-6-2, EN61000-6-3), FCCpart 15 classB, RoHS/WEEE |
| Power | 12V to 24VDC± 10%. 5.22W typical (fullframe@12V) |
| Lensmount | C-mount(fixed or adjustable) |
| Dimensions (HxWx L) | C-mount: 62mmx62mmx 55.5mm |
| Weight | 215 g |