JAI : CB-030GE
Description
This product has been discontinued as of March, 2019. For an alternative solution, please contact sales.
The JAI CB-030GE is a 1/3” Bayer Mosaic Color Progressive Scan Camera. CB-030GE member of C3 Compact series, covering VGA to UXGA resolution at 656 (h) x 494 (v) 7.4 μm square pixels.
Features
→ C3 Compact series
→ 1/3" Bayer mosaic color progressive scan CCD
→ 565 (h) x 494 (v) active pixels
→ 7.4 μm square pixels
→ 90 frames/second with full resolution
→ Partial scan and vertical binning
→ Unique sequencer function
→ Programmable GPIO
→ GigE Vision interface
Specifications
| Sensor | 1/3" progressive scan CCD |
| Pixel Clock | 40 MHz |
| Frame rate full frame | 90.5 frames/second (511 lines/frame) |
| Active area | 4.9 (h) x 3.7 (v) mm |
| Cell size | 7.4 (h) x 7.4 (v) µm |
| Active pixels | 656 (h) x 494 (v) |
| Color (CB-200 GE) | Raw Bayer output, host based interpolation |
| Read-out modes | Full: 656 (h) x 494 (v) 90.5 fps 1/2 partial scan: 656 (h) x 246 (v) 159 fps 1/4 partial scan: 656 (h) x 122 (v) 255 fps 1/8 partial scan: 656 (h) x 62 (v) 361 fps 2/3 partial scan: 656 (h) x 326 (v) 128 Vertical binning: 656 (h) x 247 (v) 166.2 fps (CM-030 GE only) Region-of-interest (ROI): User definable. Memory read-out |
| Sensitivity | 0,4 Lux Lux (On sensor, max. gain, shutter off, 50% video) |
| S/N ratio | >50dB (0 dB gain) |
| Video output | GigE Vision, 8-bit or 10-bit |
| Auto-iris lens video output | 0.7 Vp-p, enabled by internal switch |
| Gain | Manual -3 to 24 dB |
| GPIO Module, Input/output switch | Configurable 14-in/9-out switch (LUT) |
| GPIO Module, Clock generator (one) | 12-bit counter based on 25MHz clock or Pixel Clock |
| GPIO Module, Pulse generators (four) | 20-bit counters programmable for length, start point, stop point, repeat |
| Hardware trigger modes | Continuous, Pre-Select, Pulse Width, Frame Delay, Sequence (Gain, Shutter, ROI) |
| Electronic shutter, Pre-set shutter | 1/90 to 1/10,000 in 9 steps |
| Electronic shutter, Programmable exposure | 2L (43.2 micro s) to 511L (11.037ms) in 1L steps |
| Electronic shutter, Exposure Time (Abs) | Same range as PE |
| Electronic shutter, Pulse Width | max. 2 sec (Can be set by 100 micro s unit or Pixel Clock unit) |
| GPIO plus Pulse Width | Register based GigE Vision (GenICam compliant) |
| Functions controlled via GigE Vision interface | Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions) |
| GigE Vision streaming control | Packet size, Delayed (frame) Readout, Inter-packet delay |
| Indicators on rear panel | Power/Hardware trigger, GigE link, GigE activity |
| Operating Temperature | -5°C to 45°C |
| Humidity (operation) | 20 - 90% non-condensing |
| Storage temp./humidity | -25°C to 60°C / 20 to 90% |
| Vibration | 10 G (20Hz to 200 Hz XYZ) |
| Shock | 70G |
| Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power | 12V DC /-10%. 3.6 W |
| Dimensions (H x W x L) | 29 x 44 x 75 mm |
| Weight | 125 g |
Resources & Documents
| cm030.pdf | Datasheet |