Hitachi KP-FR500PCL 2/3-inch Progressive Scan CCD Color Camera – PoCL
Industrial Video System & Broadcast
Hitachi : KP-FR500PCL
Description
The Hitachi KP-FKP-FR500PCL is a CameraLink output system progressive scan RAW data output color CCD camera with a 2/3-inch size CCD which adopted the RGB primary color filter and a full frame shutter.
The image of 2456 (H) x 2058 (V) is output in RAW data at 16 frames per second. The square format picture elements provide suitability for image processing applications.
Features
→ Ultra Compact Cube Size Camera
→ 2/3″ Format Progressive Scan CCD
→ Primary RGB Color Filter
→ 2456 x 2058 Effective Pixels
→ Raw Color Output (unprocessed)
→ 2000 TV lines of Resolution
→ 16 Frames / Second
→ CameraLink Output, Dual Mini SCL Connector
→ SCL or PCL output
→ Selectable 8, 10 or 12 bits / pixel
→ Frame-on-Demand Mode
→ RoHS Compliant
Specifications
| Imaging device | Interline CCD sensor |
| Total number of pixels | EIA: 811 (H) x 508 (V) CCIR: 795 (H) x 596 (V) |
| Pixel pitch | EIA: 6.35 (H) x 7.4 (V) µm CCIR: 6.5 (H) x 6.25 (V) µm |
| Number of effective pixels | EIA: 768 (H) x 494 (V) CCIR: 752 (H) x 582 (V) |
| Imaging area | EIA: 4.88 mm x 3.66 mm (1/2-inch) CCIR: 4.89 mm x 3.64 mm (1/2-inch) |
| Signal system | Conforming to EIA/CCIR signal format (at normal operation) |
| Lens mounting | C mount |
| Flange focal distance | 17.526 mm (not an adjustable) |
| Horizontal scanning frequency | EIA: 15.734 kHz CCIR: 15.625 kHz |
| Vertical scanning frequency | EIA: 59.94 Hz CCIR: 50 Hz |
| Synchronization | Automatic changeover of internal/external synchronization |
| Internal sync scanning | 2:1 interlaced, 525 horizontal lines (CCIR: 625 lines) fv = 2 fH/525 (CCIR: lines) |
| External sync input | HD/VD, 2 to 6 Vp-p, negative polarity Input impedance: 1 kΩ, Frequency deviation: ±1% |
| Number of horizontal lines | 2:1 interlaced |
| Allowable for external synchronization | EIA: 521 to 2047 lines/2FLD, 1FLD: (61 to 15Hz) CCIR: 621 to 2047 lines/2FLD, 1FLD: (51 to 15Hz) Non-interlaced EIA: 260 to 1023 lines/2FLD, 1FLD: (61 to 15Hz) CCIR: 310 to 1023 lines/2FLD, 1FLD: (51 to 15Hz) |
| Video output | 1.0 Vp-p 75Ω unbalanced Video component: 0.7 Vp-p Sync component: 0.3 Vp-p negative polarity |
| Horizontal/vertical resolution | EIA: 570 TV lines (H)/485 TV lines (V) CCIR: 560 TV lines (H)/575 TV lines (V) |
| Sensitivity | Under illumination of 400 lx, F8, 3200K |
| Minimum illumination | 0.3lx, F1.4 AGC: On, Gamma:On, without IR filter |
| SN ratio | 56 dB |
| Electronic shutter | 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/120 (CCIR), 1/100 (EIA) sec In OFF state: Normal exposure Selectable external switch mode |
| Intergration mode | Field/frame integration mode Selectable by external switch setting |
| Gamma correction | Gamma = 1.0 or correction Selectable by internal switch |
| AGC | Pixed gain or AGC, Selectable by internal switch setting |
| Field-on-demand function | Turned on/off with internal switch |
| Restart/reset function | Turned on/off with chip component switching |
| Power requirement | 12V DC ±1 V, 180 mA approx |
| Ambient temperature and humidity | Operating: -10 to 60°C, Less than 90% RH Storage: -20 to 60°C, Less than 70% RH |
| Vibration resistance | 68.6 m/s max (10 to 60 Hz, amplitude: constant at 0.98mm) (60 to 200 Hz, amplitude: variable) (10 to 200 Hz, sweeping for one minute, Each of X, Y and Z directions for 30 minutes) |
| Dimensions and mass | 44 (W) x 29 (H) x 72 (D) mm 120g approx |
| Imaging device | 2/3-inch progressive scan interline CCD |
| Total pixels | 2536 (H) x 2068 (V) |
| Effective pixels | 2456 (H) x 2058 (V) |
| Pixel size | 3.45 µm (H) x 3.45 µm (V) (square lattice) |
| Color filter | RGB primary color mosaic filter |
| Scanning area | 8.47 mm (H) x 7.10 mm (V) |
| Scanning system | Progressive |
| Aspect ratio | 5:4 |
| Frame rate | 16 frames per second (full pixel readout) |
| Horizontal drive frequency | 64.0000 MHz |
| Horizontal scanning frequency | 33.264 kHz |
| Vertical scanning frequency | 16.00 Hz |
| Sync system | Internal |
| Lens mount | C mount |
| Flange focal distance | 17.526 mm |
| Video output | Digital output (CameraLink) Base configuration: 64.0000 MHz x 2TAP Medium configuration: 32.0000 MHz x 4TAP Maximum cable length: 10m Output image size: 2456(H) x 2058(V) (full pixel readout) |
| Sensitivity | 2000lx, F8, 3200K |
| Minimum illumination | 15lx (F1.4 GAIN MAX) |
| Signal noise to ratio | 48dB |
| Electric shutter | OFF 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/100000 second) |
| Gamma | γ = 1 |
| Frame on demand | Mode: (A) Fixed shutter (8 steps or variable) (B) ONE trigger mode (C) VD reset mode Trigger input: CameraLink (CC1) or DCIN/SYNC connector |
| Partial scan | Selectable start position and width of picture grabbing in 1H step. |
| Power supply voltage | 12 ± 1 VDC |
| Current consumption | Approx. 310 mA (Approx. 3.7W) *MAX partial scan 1H: Approx.390 mA (Approx. 4.7W) |
| Ambient | Performance: 0 to 40℃ ( 32 to 104 F), less than 90 % RH Operation: -10 to 50℃ ( 14 to 122 F), less than 90 % RH Storage: -20 to 60℃ (-4 to 140 F), less than 70 % RH (without dew condensation) |
| Vibration endurance | 10 to 55 Hz (2.37 to 71.7 m/s2), sweep: 1 min XYZ 30min |
| Shock endurance | 490.3 m/s2 (Drop test, once each top, bottom, left and right) |
| External dimensions | 44 (W) x 44 (H) x 41 (D) mm (Not including mount protrusions) |
| Mass | Approx. 110 g |
