Quickset : QPT-35
Description
The Quickset QPT-35 provides rugged, durable performance for short to mid-range imaging applications. It is also ideal for positioning smaller antennae in almost any environment. The QPT-35 excels in operations where situational awareness is the key to success.
The QPT-35 can support both single and dual payloads. Its high payload to positioner weight ratio of more than 3:1 for fixed installation optimizes the efficiency of fielding a system. It delivers great pointing repeatability to less than 0.05 degrees. The QPT-35 is also designed and tested for mobile use making it a well rounded product.
Features
- Payloads up to 35 lb ft
- Internal wire table top for IC or pass-through sensor wiring
- Fixed, Inverted or Mobile Installations
- Mil-Spec Connectors
- Tough metal housing and gearing for durability in harsh environments
- Marine configuration that meets IP-67 standards
- Thermostatically controlled heaters standard
Specifications
Standard Performance
Weight: 12.2 lbs
Load Torque: 35 lb-ft
Operating Voltage: 24VDC (±2 VDC)
Pan-Axis Range: Continuous Rotation
Pan-Axis Speed: 0.005° – 25°/sec (faster with lighter loads)
Tilt-Axis Range: 180° (±90°)
Tilt-Axis Speed: 0.005° – 7°/sec (faster with lighter loads)
Repeatability: <0.05° (Pan / Tilt)
Operating Temperature: -32˚C to 55˚C
Tilt Connector Features
Port A
- Full featured serial control of single sensor
- Motor drivers for camera lens zoom and focus control
- One auxiliary relay control for wiper, illuminator
Port B
- Serial pass-through
- Wired for power and video
Serial IP Features
Microprocessor Control
Software controlled with status feedback
Serial Communication: (RS232 / 422 / 485) and IP
Control Protocols: QuickSet and Pelco D
2 programmable tours and 32 presets
Mil-Spec Shock & Vibration
Passed Shock: MIL-STD-810F Meth.516.5
Passed Vibration: MIL-PRF-49256A
Resources & Documents
| qpt-35_pan_tilt_specs.pdf | datasheet |