Nitek : PVX44
Description
The Nitek 4 Port Video, Power and Data Distribution PVX44 unit. Systems operate with other Nitek UTP video equipment including video hubs, standard video balun transceivers, active transmitters or any twisted pair equipped camera.
The PVX44 utilizes standard 4-pair Category UTP cabling as a means of distributing video, power and data up to 4 cameras. Any third party Class 2 power supplies can be used with the PVX44. VB43ATF video, power, and data transceivers are required at the camera end. The PVX44 transmits 4 video signals from the cameras into one 4-pair Category cable. Nitek M series hubs can be used for quick and secure installations.
The systems can also adapt to existing communication and computer network spare pairs or new cable installations. These units provide superior immunity from noise and interference, even when run in common raceways with AC.
Available Configurations Include:
| PVX164 | UTP Mid Span Power & Data Inserter Unit – 16 Port |
Features
PVX44 features include:
- High quality video over ordinary twisted pair cable
- Video, power and data over one Category cable
- High immunity to noise and interference
- LEDs to indicate power detection
- RJ45 jacks for quick and secure connections
- Can be used in mid-span, or local network solutions
- Video can be run in the same cable with telephone, computer signals and power
- Compatible with structured wiring installations
Specifications
| Camera Port | RJ45 Connector |
| Data Port | RJ45 Connector |
| Video Port | RJ45 Connector |
| Power | Screw Terminals for 16-24 AWG wire |
| Power Requirements | Class 2 Low Voltage |
| Temperature Range | -20 degrees C to 55 degrees C |
| Humidity Range | 0 to 95%, non-condensing |
| Shipping Weight | 2 lbs |
Resources & Documents
| pvx44_spec.pdf | Datasheet |