Sentech : STC-SC133USB-B
Description
The STC-SC133USB-B is an ultra-compact, progressive scan, SXGA, USB camera with a 1/3” color CCD. It features 22fps, hardware and software triggering image capture, digital zoom and a feature-rich user based menu setup and control. The STC-SC133USB-B is a board model available with rear or side mini-USB connectors. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.
Also Available: STC-SC133USB-BLCS, STC-SC133USB-BSCS
Features
STC-SC133USB-B features include:
|
|
|
Specifications
|
Image Sensor |
1/3" interline 1.3M color progressive CCD: ICX445AQ (Sony |
|
Total Picture Element |
1348 (H) x 976 (V) |
|
Effective Picture Element |
1296 (H) x 966 (V) |
|
Chip Size |
6.26 (H) x 5.01 (V) mm |
|
Cell Size |
3.75 (H) x 3.75 (V) μm |
|
Scanning System |
Progressive |
|
Resolution |
"1280 (H) x 960 (V) (Full scanning) 1280 (H) x 440 (V) (1/2 partial scanning) 1280 (H) x 168 (V) (1/4 partial scanning)" |
|
Scanning Method |
Full scanning, 1/1 partial scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning |
|
Maximum Frame Rate |
- |
|
- Full Scanning |
22.40 fps (Normal) / 11.20 fps (1/2 clock) / 5.60 fps (1/4 clock) |
|
- 1/2 Partial Scanning |
44.81 fps (Normal) / 22.40 fps (1/2 clock) / 11.20 fps (1/4 clock) |
|
- 1/4 Partial Scanning |
89.80 fps (Normal) / 44.90 fps (1/2 clock) / 22.45 fps (1/4 clock) |
|
Pixel Frequency |
36.818 MHz (Normal) / 18.409 MHz (1/2 clock) / 9.20453 MHz (1/4 clock) |
|
Video Output |
8bit / 10bit / 12bit |
|
Minimum Scene Illumination |
TBD |
|
Sync System |
Internal |
|
Electronic Shutter |
Auto / Manual (software selectable) |
|
- Normal |
1/36,818,182 to 1/22.40 seconds (default:1/22.40 seconds) |
|
- 1/2 Clock |
1/18,409,091 to 1/11.20 seconds |
|
- 1/4 Clock |
1/9,204,545 to 1/5.60 seconds |
|
Gain |
Auto / Manual (software selectable,default: x3.55) |
|
Gamma |
Manual (software selectable,default: 1) |
|
White Balance |
Auto / Manual / One shot (software selectable) |
|
Trigger Mode |
Free-run / Edge preset trigger / Pulse width trigger / Start & stop trigger (software selectable) (Hardware trigger and Software tigger are available) |
|
Camera Reset |
Support on Pin 5 |
|
LED Indicator |
Green(Flicker):Power-On, Green:Camera works |
|
Pixel Blemish Correction |
64 Points |
|
Input / Output |
USB2.0 High speed |
|
Power |
- |
|
- Input Voltage |
+5 V through USB connector (+4.4 to +5.25V) |
|
- Consumption |
Less then 1.5W |
|
Dimensions |
Board Type::36(W) x 36(H) x 15.3(D) CS-Mount(without USB connector) |
|
Lens Mount |
CS mount / MicroLens Mount / None Mount |
|
Weight |
Approximately 16g |
|
Interface Connector |
|
|
- Angle |
USB: mini-B USB connector IO Connector ：SM05B-SRSS-TB (JST) 5pin |
|
Operating Temperature |
0 to 40 deg. C |
|
Storage Temperature |
-30 to 65 deg. C |
|
Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acccelaration 10G, 3 directions 30 min. each |
|
Shock |
Accelaration 70G, half amplitude 6ms, 3 directions 3 times each |
|
Standard Compliancy |
TBD |
|
RoHS |
RoHS compliance |