XGA (1024×768), 1/3″, color, w/o IR cut filter, 30fps, full triggering, variable partial scan, CameraLink output
By: Sentech
Industrial, USB, & Medical Cameras
Sentech : STC-CLC83A
Description
The Sentech STC-CLC83A is a full featured, cost effective, XGA, progressive scan, digital CameraLink® cube camera with a 1/3″ color CCD. It features full frame, 30fps, XGA output, partial scanning, triggering, and reset capabilities.
Also Available: STC-CLC83A-F
Features
STC-CLC83A features include:
|
|
|
Specifications
| Resolution | XGA (0.8 MegaPixel) |
| Image Sensor | 1/3" Interline CCD (ICX204AK) |
| Signal Format | Progressive: Color |
| Frame Rate | 30fps |
| Total Picture Element | 1077 (H) x 788 (V) |
| Active Picture Element | 1024 (H) x 768 (V) |
| Chip Size (mm) | 4.65 (H) x 4.65 (V) μm |
| Cell Size (um) | 5.8 (H) x 4.92 (V) mm |
| Vertical Frequency | 29.2 Hz |
| Horizontal Frequency | 23.23 kHz |
| Pixel Frequency | 29.5 MHz |
| Scanning Method | Full Scan / Partial Scan (1/2, 1/4, Variable) |
| Sync System | Internal / External (HD/VD) |
| Communication | RS232 via CameraLink® connector |
| Trigger Shutter | Pulse Width Trigger (V Reset, Non Reset); Edge Preset Trigger (V Reset, Non Reset) |
| Shutter Speed | OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock) |
| Minimum Illumination | 0.05 Lux @ F1.2, 20 IRE; 0.14 Lux @ F1.2, 50 IRE |
| Gain | Adjustable Fixed Gain (0 ~ 27dB) |
| S/N Ratio | @ 8bit output: <= 3 Digit (Gain 0 dB); @ 10bit output: <= 10 Digit (Gain 0 dB) |
| Gamma | 1.0 |
| Lens Mount | C Mount |
| Video Output | Digital 8 or10 bit CameraLink® (Base Configuration) |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Position accuracy of H and V direction: /- 0.31mm; Rotational accuracy of Hand V: /- 2.1 deg. |
| Shock | 70G (3 directions, 3 times each) |
| Vibration | 10G (20 to 200Hz) |
| Power | 12Vdc ± 10% |
| Consumption | < 1.8W, 150mA |
| Operating Temperature | -5°C ~ 50°C (23°F ~ 122°F) |
| Storage Temperature | -30°C ~ 65°C (-22°F ~ 140°F) |
| Dimensions | 28(W) x 28(H) x 29.5(D) mm (1.1 x 1.1 x 1.16) (Not including lens mount or the connector) |
| Weight | 43g (1.51 oz.) |