Sentech : STC-CL232A
UXGA (1620×1236), 1/1.8″ B/W, 30fps, full triggering, variable partial scan, Camera Link output
By: Sentech
Industrial, USB, & Medical Cameras
Description
The Sentech STC-CL232A is a full featured, cost effective, UXGA, progressive scan, digital CameraLink® cube camera with a 1/1.8″ monochrome CCD. It features full frame, 30fps, UXGA output, partial scanning, triggering, and reset capabilities.
Features
STC-CL232A features include:
|
|
|
Specifications
| Resolution | UXGA (2 MegaPixel) |
| Image Sensor | 1/1.8" Interline CCD (ICX274AQ) |
| Signal Format | Progressive: Monochrome |
| Frame Rate | 30fps |
| Total Picture Element | 1688 (H) x 1248 (V) |
| Active Picture Element | 1620 (H) x 1236 (V) |
| Chip Size (mm) | 4.4 (H) x 4.4 (V) μm |
| Cell Size (um) | 8.5 (H) x 6.8 (V) mm |
| Vertical Frequency | 30.854Hz |
| Horizontal Frequency | 38.352 kHz |
| Pixel Frequency | 73.636 MHz |
| Scanning Method | Full Scan / Partial Scan (1/2, 1/4, Variable) |
| Sync System | Internal |
| Communication | RS232 via CameraLink® connector |
| Trigger Shutter | Pulse Width Trigger (V Reset, Non Reset); Edge Preset Trigger (V Reset, Non Reset) |
| Shutter Speed | OFF, 1/9 to 1/240,000 seconds (Variable at every H and clock) |
| Minimum Illumination | 0.31 Lux @ F1.2, 20 IRE; 0.92 Lux @ F1.2, 50 IRE |
| Gain | Adjustable Fixed Gain (0 ~ 25dB) |
| S/N Ratio | @ 8bit output: <= 4 Digit (Gain 0 dB); @ 10bit output: <= 15 Digit (Gain 0 dB) |
| Gamma | 1.0 |
| Lens Mount | C Mount |
| Video Output | Digital 8 or10 bit CameraLink® (Base Configuration) |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Position accuracy of H and V direction: /- 0.31mm |
| Vibration | 10G (20 to 200Hz) |
| Power | 12Vdc ± 10% |
| Consumption | < 4.0W, 333mA |
| Operating Temperature | -5°C ~ 40°C (23°F ~ 104°F) |
| Storage Temperature | -30°C ~ 65°C (-22°F ~ 140°F) |
| Dimensions | 28(W) x 28(H) x 36.5(D) mm (1.1 x 1.1 x 1.44) (Not including lens mount or the connector) |
| Weight | 65.5g (2.31oz.) |