Sentech : STC-CL500A
Description
The Sentech STC-CL500A is a full featured, cost effective QSXGA digital CameraLink® cube camera. This camera delivers a full 5M Pixels resolution at 16 fps. It has a 2/3 monochrome CCD and also features partial scanning, triggering, and reset capabilities.
Features
Specifications
| Resolution | QSXGA (5 MegaPixel) |
| Image Sensor | 2/3" Interline CCD (ICX625AQ) |
| Signal Format | Progressive: Monochrome |
| Frame Rate | 16fps |
| Total Picture Element | 2456 (H) x 2058 (V) |
| Active Picture Element | 2448 (H) x 2058 (V) |
| Chip Size (mm) | 3.45 (H) x 3.45 (V) μm |
| Cell Size (um) | 9.93 (H) x 8.70 (V) mm |
| Vertical Frequency | 16 Hz |
| Horizontal Frequency | 33.264kHz |
| Pixel Frequency | 64.0 MHz |
| Scanning Method | Full Scan / Partial Scan (1/2, 1/4, Variable) |
| Sync System | Internal |
| Communication | RS232 via CameraLink® connector |
| Trigger Shutter | Pulse Width Trigger (V Reset, Non Reset); Edge Preset Trigger (V Reset, Non Reset) |
| Shutter Speed | OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock) |
| Minimum Illumination | 0.32 Lux @ F1.2 |
| Gain | Adjustable Fixed Gain (0 ~ 16.3dB) |
| S/N Ratio | 8bit output: <= 4 Digit (Gain 0dB); 10bit output: <= 15 Digit (Gain 0dB); 12bit output: <= 60 Digit (Gain 0dB) |
| Gamma | 1.0 |
| Lens Mount | C Mount |
| Video Output | Digital 8/10/12 bit CameraLink® (Base Configuration), 2 taps |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Position accuracy of H and V direction: /- 0.31mm |
| Shock | 70G (3 directions, 3 times each) |
| Vibration | 10G (20 to 200Hz) |
| Power | 12Vdc ± 10% |
| Consumption | < 4.0W, 333mA |
| Operating Temperature | -5°C ~ 40°C (23°F ~ 104°F) |
| Storage Temperature | -30°C ~ 65°C (-22°F ~ 140°F) |
| Dimensions | 35(W) x 35(H) x 40.7(D) mm (1.38 x 1.38 x 1.6) (Not including lens mount or the connector) |
| Weight | 80g (2.82 oz) |