Sentech : STC-BC202A
Description
The Sentech STC-BC202A is a 1/1.8″ color CCD, digital raw data output board camera with 1620 (H) x 1220 (V) resolution. This series features a UXGA sensor with a scan rate of 15fps, digital raw data output and variable integration shutter trigger.
Also Available: STC-BC202A-F
Features
STC-BC202A features include:
|
|
|
Specifications
Resolution | UXGA (2 MegaPixel) |
Image Sensor | 1/1.8" Interline CCD (ICX274AQ) |
Signal Format | Progressive: Color |
Frame Rate | 15 fps |
Effective Picture Element | 1628 (H) x 1236 (V) |
Active Picture Element | 1620 (H) x 1220 (V) |
Chip Size (mm) | 8.5 (H) x 6.8 (V) mm |
Cell Size (um) | 4.4 (H) x 4.4 (V) µm |
Vertical Frequency | 15.3164 Hz |
Horizontal Frequency | 19.176 kHz |
Horizontal Drive Frequency | 36.8181 MHz |
Scanning Method | Full Scanning, Partial Full Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning |
Sync System | Internal / External |
Communication | RS232 via DF12-36DS-0.5V connector |
Trigger Shutter | Edge Preset Trigger (V-reset, Non-reset), Pulse Width Trigger (V-reset, Non-reset) |
Shutter Speed | OFF, 1/4 ~ 1/120,000 seconds (Variable at every H and clock) |
Minimum Illumination | 0.08 Lux at F1.2 |
Gain | 0 to 27 dB |
S/N Ratio | @ 8bit output: ≤ 3 Digit (Gain 0 dB); @ 10bit output: ≤ 10 Digit (Gain 0 dB) |
Gamma | 1.0 |
Lens Mount | C Mount |
Video Output | Digital 8 or 10 bit parallel low voltage output |
Tap | 1 Tap |
Interface Connector | DF12-36DS-0.5V (Hirose) |
Optical Filter | No IR cut filter |
Optical Center Accuracy | Positional Accuracy in H and V Directions: /- 0.31 mm Rotational Accuracy of H and V: /- 2.1 deg. |
Power | 12Vdc ± 10% |
Power Consumption | < 3.0W, 250mA |
Operating Temperature | It depends on 1) how the system is assembled and 2) how heat conditions are managed within the system. |
Storage Temperature | -30°C ~ 65°C (-38.1°F ~ 149°F) |
Dimensions | 28 (W) x 28 (H) x 33 (D) mm (1.1" x 1.1" x 1.29") |
Weight | 26g (0.91 oz) |