Omron Sentech STC-B152A Raw Digital Output Monochome Camera
By: Sentech
Industrial, USB, & Medical Cameras
Sentech : STC-B152A
Description
The Sentech STC-B152A is a 1/2″ monochrome CCD, digital raw data output board camera with 1360 (H) x 1040 (V) resolution. This series features a SXGA sensor with a scan rate of 19fps, digital raw data output and variable integration shutter trigger.
Features
STC-B152A features include:
|
|
|
Specifications
| Resolution | SXGA (1.8 MegaPixel) |
| Image Sensor | 1/2″ Interline CCD (ICX205AL) |
| Signal Format | Progressive: Monochrome |
| Frame Rate | 15, 19fps |
| Effective Picture Element | 1392 (H) x 1040 (V) |
| Active Picture Element | 1360 (H) x 1040 (V) |
| Chip Size (mm) | 7.6 (H) x 6.2 (V) mm |
| Cell Size (um) | 4.65 (H) x 4.65 (V) µm |
| Vertical Frequency | 15.28 (15fps) / 19.3 (19fps) Hz |
| Horizontal Frequency | 15.998 (15fps) / 20.57 (19fps) kHz |
| Horizontal Drive Frequency | 28.6363 (15fps) / 36.8181 (19fps) MHz |
| Scanning Method | Full Scanning, Partial Full Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning Partial Scanning, Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning, Binning Variable Partial Scanning |
| Sync System | Internal / External |
| Communication | RS232 via DF12-36DS-0.5V connector |
| Trigger Shutter | Edge Preset Trigger (V-reset, Non-reset), Pulse Width Trigger (V-reset, Non-reset) |
| Shutter Speed | OFF, 1/3 to 1/93,000 seconds (Variable at every H and clock) (15fps) OFF, 1/5 to 1/120,000 seconds (Variable at every H and clock) (19fps) |
| Minimum Illumination | 0.11 Lux at F1.2 |
| Gain | 0 to 27 dB |
| S/N Ratio | @ 8bit output: ≤ 3 Digit (Gain 0 dB); @ 10bit output: ≤ 10 Digit (Gain 0 dB) |
| Gamma | 1.0 |
| Lens Mount | C Mount |
| Video Output | Digital 8 or 10 bit parallel low voltage output |
| Tap | 1 Tap |
| Interface Connector | DF12-36DS-0.5V (Hirose) |
| Optical Filter | No IR cut filter |
| Optical Center Accuracy | Positional Accuracy in H and V Directions: /- 0.31 mm Rotational Accuracy of H and V: /- 2.1 deg. |
| Power | 12Vdc ± 10% |
| Power Consumption | < 2.5 W |
| Operating Temperature | It depends on 1) how the system is assembled and 2) how heat conditions are managed within the system. |
| Storage Temperature | -30°C ~ 65°C (-38.1°F ~ 149°F) |
| Dimensions | 28 (W) x 28 (H) x 33 (D) mm (1.1″ x 1.1″ x 1.29″) |
| Weight | 26g (0.91 oz) |